FACTOID # 30: If Alaska were its own country, it would be the 26th largest in total area, slightly larger than Iran.
 
 Home   Encyclopedia   Statistics   States A-Z   Flags   Maps   FAQ   About 
   
 
WHAT'S NEW
 

SEARCH ALL

FACTS & STATISTICS    Advanced view

Search encyclopedia, statistics and forums:

 

 

(* = Graphable)

 

 


Encyclopedia > Wubi method
The Wubi keyboard
The Wubi keyboard

The Wubizixing input method (simplified Chinese: 五笔字型输入法; traditional Chinese: 五筆字型輸入法; pinyin: wǔbǐ zìxíng shūrùfǎ; literally "five stroke character model input method"), often abbreviated to simply Wubi or Wubi Xing[1], is a Chinese character input method primarily for inputting simplified Chinese text on a computer. Wubi should not be confused with the Wubihua (五笔画) method, which is a completely different input method. Wubi (Windows-based Ubuntu Installer) is an official Windows-based free software installer for Ubuntu, licensed under the GPL.[1] Wubi was born as an independent project, as such 7. ... Simplified Chinese character (Simplified Chinese: or ; traditional Chinese: or ; pinyin: or ) is one of two standard sets of Chinese characters of the contemporary Chinese written language. ... Traditional Chinese characters refers to one of two standard sets of printed Chinese characters. ... Pinyin, more formally called Hanyu Pinyin (Simplified Chinese: ; Traditional Chinese: ; Pinyin: ), is the most common variant of Standard Mandarin romanization system in use. ... Since the Chinese language uses a logographic script — that is, a script where one or two characters corresponds roughly to one word or meaning — there are vastly more characters, or glyphs, than there are keys on a standard computer keyboard. ... Simplified Chinese character (Simplified Chinese: or ; traditional Chinese: or ; pinyin: or ) is one of two standard sets of Chinese characters of the contemporary Chinese written language. ... The Wubihua method () is a Chinese input method for writing text on a computer. ...


The method is also known as Wang Ma (simplified Chinese: 王码; traditional Chinese: 王碼; pinyin: wáng mǎ; literally "Wang's code"), named after the inventor Wang Yongmin (王永民). There are three Wubi versions that are considered to be standard: Wubi 86, Wubi 98 and Wubi 18030. The latter two can also be used to input traditional Chinese text, albeit in a more limited way. Wubi 86 is the most commonly used version. Simplified Chinese character (Simplified Chinese: or ; traditional Chinese: or ; pinyin: or ) is one of two standard sets of Chinese characters of the contemporary Chinese written language. ... Traditional Chinese characters refers to one of two standard sets of printed Chinese characters. ... Pinyin, more formally called Hanyu Pinyin (Simplified Chinese: ; Traditional Chinese: ; Pinyin: ), is the most common variant of Standard Mandarin romanization system in use. ... Traditional Chinese characters refers to one of two standard sets of printed Chinese characters. ...


The Wubi method is based on the structure of characters rather than their pronunciation, making it possible to input characters even when you do not know the pronunciation, as well as not being too closely linked to any particular Chinese dialect. It is also extremely efficient: every character can be written with at most 4 keystrokes. In practice, most characters can be written with less. There are reports of experienced typists reaching 160 characters per minute with Wubi. What this means in the context of Chinese is not entirely the same as it is for English, but it is true that Wubi is extremely fast when used by an experienced typist. The main reason for this is that, unlike with traditional phonetic input methods, one does not have to spend time selecting the desired character from a list of homophonic possibilities: virtually all characters have a unique representation.


As its name suggests, the keyboard is divided into five regions. The Chinese character 笔 (bǐ), when used in the context of writing Chinese characters, refers to the brush strokes used in Chinese calligraphy. Each region is assigned a certain type of stroke.

  • Region 1: horizontal (一)
  • Region 2: vertical (丨)
  • Region 3: downwards right-to-left (丿)
  • Region 4: dot strokes or downwards left-to-right strokes (丶)
  • Region 5: hook

A major drawback to learning Wubi is its learning curve. Memorization and practice are key factors for proficient usage.


In this article, the following convention will be used: character will always mean Chinese character, whereas letter, key and keystroke will always refer to the keys on your keyboard.

Contents

How it works

Essentially, a character is broken down into components, which are usually (but not always) the same as radicals. These are typed in the order in which they would be written by hand. In order to ensure that extremely complex characters do not require an inordinate number of keystrokes, any character containing more than 4 components is entered by typing the first 3 components written, followed by the last. In this way, each character's data can be entered with only 4 keystrokes. The left part of mā, a Chinese character meaning mother, is a radical that means woman A radical (from Latin radix, meaning root) is a basic identifiable component of every Chinese character. ...


Wubi distributes its characters very evenly and as such the vast majority of characters are uniquely defined by the 4 keystrokes discussed above. One then types a space to move the character from the input buffer onto the screen. In the event that the 4 letter representation of the character is not unique, one would type a digit to select the relevant character (for example, if two characters have the same representation, typing 1 would select the first, and 2 the second). In most implementations, a space can always be typed and simply means 1 in an ambiguous setting. Intelligent software will try to make sure that the character in the default position is the one desired.


Many characters have more than one representation. This sometimes is for ease of use, in case there is more than one obvious way to break down a character. More often though, it's because certain characters have a short representation that is less than 4 letters, as well as a "full" representation.


For characters with less than 4 components that do not have a short form representation, one types each component and then "fills up" the representation (that is, types enough extra keystrokes to make the representation 4 keystrokes) by manually typing the strokes of the last component, in the order they would be written. If there are too many strokes, one should write as many as possible, but put the last stroke last (this mirrors the component rule for characters with more than 4 components outlined above).


This sounds very complex, but it actually is pretty easy to learn. The examples below might help. Once the algorithm is understood, one can type any character (pretty much) with a little practice, even if they haven't typed it before. Muscular memory will make sure that frequent typists using this method don't have to think about how the characters are actually constructed, just as the vast majority of English typists don't think very much about the spelling of words when they write.


Implementation specific details

Many implementations employ further, multiple-word optimizations. Usually, a commonly used digraph (two character word) in which both characters have short form two-keystroke representations can be combined into a single, four keystroke representation which generates two characters rather than one. There are also a few 3-character shortcuts, and even one rather longer, politically motivated one. Some examples of these are provided in the examples section below. A keyboard shortcut (also known as an accelerator key or hotkey) is a set of keyboard keys that when pressed simultaneously, perform a predefined task. ...


Another common feature is the use of the 'z' key as a wildcard. The Wubi method was actually designed with this feature in mind; this is why no components are assigned to the z key. Basically, one can type a z when unsure what the component should be, and the input method will help complete it. If one knew, for example, that the character ought to start with "kt", but was unsure what the next component should be, typing "ktz" would produce a list of all characters starting with "kt". In practice though, many input method engines use a tabular lookup method for all table based input systems, including for Wubi. This means that they simply have a large table in memory, associating different characters to their respective representations. The input method then simply becomes a table lookup. In such an implementation, the z key breaks the paradigm and as such is not found in a lot of generalized software (although the Wubi input method commonly found in Chinese Windows implements the feature). For this same reason, the multiple character optimization described in the previous paragraph is also relatively rare.


Some input methods, such as xcin (found on many UNIX-like systems), provide a generic wildcard functionality which can be used in all the table based input systems, including pinyin and virtually anything else. Xcin uses '*' for auto-complete and '?' for just one letter, following the conventions pioneered in UNIX file globbing. Other implementations probably have their own conventions.


Subdivision of the keyboard

The Wubi keyboard assumes a QWERTY-like layout, so users of keyboards implementing a nationalized or alternative layout (such as Dvorak or the French AZERTY) will probably have to do some remapping to make the system sane. Wubi does not position its components arbitrarily: there are far too many of them, and it is only with the introduction of a logical methodology that the system becomes easy to learn. The Dvorak Simplified Keyboard layout. ...


Basically, the keyboard is divided into 5 zones, each representing a stroke. Those five strokes are falling left, falling right, horizontal, vertical, and hook, and the zones that represent them are QWERT, YUIOP, ASDFG, HJKLM, and XCVBN, respectively. These zones are all laid out horizontally, with the exception of M, which is not in line with the rest of the letters in its zone.


In a general way, the keyboard can be thought of as divided down the center, between T and Y, G and H, and N and M. The keys in each zone are numbered moving away from this dividing line: so we should actually say that in zone QWERT, T is the first letter, R is the second, and E the third; in zone YUIOP, Y is the first, U is the second, I the third, etc. For XCVBN, N is the first, and so on. In HJKLM, consider M to be the last in the series, even though it does not lie on the line.


This is important because components in the first position will have one repetition of the stroke in question (the stroke assigned to the zone in which they belong), those in the second, two, those in the third, three. Those components which are not easily classifiable using this paradigm will be placed on the last letter.


Therefore one would expect 一 to be located on G, and 二 on F, and 三 on D, and indeed, this is the case. Similarly, one would expect 丨 to be located on H, 刂 to be on J, and 川 to be on K. This pattern holds for all the zones. Furthermore, it extends to most radicals that look as though they are made up of three such strokes, even if in fact they might not be at all. An example of this is 中 on K: while it does not have three downward strokes (two only), it appears to have three. Furthermore, it is written by hand by first writing a mouth radical, 口, and then bisecting it with a vertical downward stroke. The mouth radical lies on 'K', so this makes the assignment doubly logical. And the pinyin romanization of 口, kou3, begins with k, too! There are many such memory aids encoded into the Wubi keyboard.


Furthermore, each letter of each zone has one component associated with it, its "main component". These are usually a complete character (with the exception of X) in their own right. One can always type this main component by typing the letter it is situated on four times. So, for example, the main component of H is 目, and so one would type it by typing "hhhh".


Each letter also has a shortcut character associated with it. In some cases, this character is the same as the component associated with the key in question, and sometimes not. This shortcut character is the character produced when one types just the letter and nothing else; these are all extremely common characters used when typing Chinese.


It is entirely possible that there are a number of components not listed below, either because of oversight, because they are rarely used , or because there is no Unicode representation for anything that isn't hopelessly complex.


QWERT zone (falling left)

The Q key's main component is 金 and its shortcut character is 我. It is associated with the following components: 金, 钅, 勹, 儿, 夕, as well as the hook at the top of 饣 and 角, the radical 犭 without the lower left-falling stroke (so characters with that radical start with "qt", not just "q"), the criss-cross (such as in the center of 区), the top of 鱼 (ie, without the horizontal stroke at the bottom), and the three (nearly vertical) "feet" in the bottom right corner of 流.


The W key's main component and shortcut character are both 人. It is associated with the following components: 人, 亻, 八, and the top of 癸. While 人 means man, it is often used by Wubi to construct a roof radical, such as in 会, "wfc". 入 is not governed by W, despite looking similar, and while 餐 has a top that looks vaguely like the top of 癸, the two are not the same (indeed, to type 餐, one must physically type out each component on the top).


The E key's main component is 月, and its shortcut character is 有. It is associated with the following components: 月, 用, 彡, 乃, the bottom of 衣 (ie, without 亠), the top of 孚 (ie, without 子), the bottom part of 家 (ie, without the roof radical), the bottom of 良 (ie, without the 白), and the bottom of 舟 (ie, without the little dot on the top). In this case, E's shortcut character does not even begin with a left-falling stroke, but merely prominently figures a component belonging to E. 彡 is featured on this character, as it is the third character in the zone (counting from Q, see above). A particular distortion that comes up often is the use of E in 且 and in characters containing it: Wubi thinks of this component as 月 + 一.


The R key's main component is 白, and its shortcut character is 的. It is associated with the following components: 白, 手, 扌, 斤 (both with and without the T), 牛 (without the vertical downward stroke), and of course the two left-falling strokes (I cannot find the unicode glyph that represents them) that one would expect from the second key in the zone (see above for an explanation). Watch out for varieties of 手 where the central downward hook is replaced by a left-falling stroke, such as in 看.


The T key's main component is 禾, and its shortcut character is 和. It is associated with the following components: 禾, 竹, 夂, 攵, 彳, and the top of 乞 (ie, without the 乙). 竹 may also be found in its smaller form, as seen on the top of 筇. 丿 is also found on this key, because T is the first key in the zone (see above). This means that if one is typing a component or character stroke by stroke, they would (generally) use T to represent a left-falling stroke. See the section on disambiguation strokes for more information on exceptions to this rule. This article is about the Wubi Chinese character input method. ...


YUIOP zone (falling right)

This zone might also be called the dot zone, because its pattern of Y: 讠 U: 冫 I: 氵 and O: 灬 is not actually necessarily built up of right falling strokes. In fact, one could argue that the first stroke in 灬 actually falls left. It is called the falling right zone because the keys in this zone, when used to construct a character by stroke (rather than component), all represent right falling strokes for some character configuration (see the section on disambiguation strokes for more information). This article is about the Wubi Chinese character input method. ...


The Y key's main component is 言, and its shortcut character is 主. It is associated with the following components: 言, 讠, 亠, 亠 with a 口 beneath it, 广, 文, 方, and 丶. These components all start with a right-falling stroke. Generally, dots in Chinese characters are actually left falling strokes, and so most of the time, the use of T is more appropriate than Y. Of course, if one can write Chinese characters by hand, they should be able to tell which to choose by recalling how it is written.


The U key's main component is 立, and its shortcut character is 产. It is associated with the following components: 立, 六, 辛, 门, 疒, 丬, 冫, the "antennae" on the top of 单 (just two strokes), and the antennae plus a horizontal stroke, as found on the top of 兹. Most of these all feature two short diagonal strokes (门 being the obvious exception). This is consistent with R's place as the second letter in the zone (see above for an explanation).


The I key's main component is 水, and its shortcut character is 不. It is associated with the following components: 水, 氵, 小, the three strokes on the top of 学, and the three strokes on the top of 当. Additionally, a component which might be described as two 冫, back to back, is associated with this character.


The O key's main component is 火, and its shortcut character is 为. It is associated with the following components: 火, 米, 灬, and 业 without the bottom horizontal stroke -- this allows construction of characters such as 严. This is the 4th key in the falling right zone: hence the inclusion of 灬.


The P key's main component is 之, and its shortcut character is 这. It is associated with the following components: 之, 辶, 廴, 冖, 宀, and 礻. As Wubi components are typed in the order that they would need to be written were one writing by hand, the 辶 and 廴 components are typically typed last.


ASDFG zone (horizontal)

  • The A key's shortcut character is 工.
  • The S key's main component is 木, and its shortcut character is 要.
  • The D key's main component is 大, and its shortcut character is 在.
  • The F key's main component is 土, and its shortcut character is 地. The main component's name (earth) correlates to the shortcut character which means earth.
  • The G key's main component is 王, and its shortcut character is 一.

HJKLM zone (vertical)

  • The H key's main component is 目, and its shortcut character is 上.
  • The J key's main component is 日, and its shortcut character is 是.
  • The K key's main component is 口, and its shortcut character is 中.
  • The L key's main component is 田, and its shortcut character is 国.
  • The M key's main component is 山, and its shortcut character is 同.

XCVBN zone (hook)

  • The C key's main component is 又, and its shortcut character is 以.
  • The V key's main component is 女, and its shortcut character is 发.
  • The B key's main component is 子, and its shortcut character is 了.
  • The N key's main component is 已, and its shortcut character is 民.

Disambiguation strokes

The disambiguation stroke is depending on the last stroke of a character. For characters with 左右結構 (left-right structure), the disambiguation stroke follows rule:

  1. G, for characters with last stroke of 橫 (héng)
  2. H, for characters with last stroke of 竪 (shù)
  3. T, for characters with last stroke of 撇 (piě)
  4. Y, for characters with last stroke of 捺 (nà)
  5. N, for characters with last stroke of 折 (zhé)

For characters with 上下結構 (top-bottom structure), the disambiguation stroke follows rule:

  1. F, for characters with last stroke of 橫 (héng)
  2. J, for characters with last stroke of 竪 (shù)
  3. R, for characters with last stroke of 撇 (piě)
  4. U, for characters with last stroke of 捺 (nà)
  5. B, for characters with last stroke of 折 (zhé)

For other characters, the disambiguation stroke follows rule:

  1. D, for characters with last stroke of 橫 (héng)
  2. K, for characters with last stroke of 竪 (shù)
  3. E, for characters with last stroke of 撇 (piě)
  4. I, for characters with last stroke of 捺 (nà)
  5. V, for characters with last stroke of 折 (zhé)

Examples

Characters with 4 components or fewer (but no need for strokes)


Characters with more than 4 components


Characters with fewer than 4 components (needing strokes)

Characters requiring disambiguation strokes

Φ♣♣♣♣


Poem

A poem was made as a mnemonic for the Wubi keyboard:

王旁青头兼五一
土士二干十寸雨
⋯⋯⋯⋯⋯⋯⋯

omitted full text due to the copyright


Notes and references

  1. ^ This is the name used in Mac OS X

External links

  • Official website
  • Wubizixing for Speakers of English
  • Full tables of Wubi sequences
This article contains Chinese text.
Without proper rendering support, you may see question marks, boxes, or other symbols instead of Chinese characters.
Image File history File links Zhongwen. ... The UTF-8-encoded Japanese Wikipedia article for mojibake, as displayed in ISO-8859-1 encoding. ... Japanese name Kanji: Hiragana: Korean name Hangul: Hanja: Vietnamese name Quốc ngữ: Hán tá»±: A Chinese character or Han character (simplified Chinese: ; traditional Chinese: ; pinyin: ) is a logogram used in writing Chinese, Japanese, rarely Korean, and formerly Vietnamese. ...

  Results from FactBites:
 
Wubi method - definition of Wubi method in Encyclopedia (2580 words)
Wubi, short for Wubizixing (五笔字型 pinyin wu3 bi3 zi4 xing2), is an input method for writing Simplified Chinese text on a computer.
The Wubi method is based on the structure of characters rather than their pronunciation, making it possible to input unfamiliar characters, as well as not being too closely linked to any particular Chinese dialect.
Wubi does not position its components arbitrarily: there are far too many of them, and it is only with the introduction of a logical methodology that the system becomes easy to learn.
Wubi method - Wikipedia, the free encyclopedia (2594 words)
Wubi, short for Wubizixing (五笔字型 pinyin wǔ bǐ zì xíng), is an input method for writing Simplified Chinese text on a computer.
Muscular memory will make sure that frequent typers using this method don't have to think about how the characters are actually constructed, just as the vast majority of English typists don't actually think very much about the spelling of words when they write.
As Wubi components are typed in the order that they would need to be written were one writing by hand, the 辶 and 廴 components are typically typed last.
  More results at FactBites »

 
 

COMMENTARY     


Share your thoughts, questions and commentary here
Your name
Your comments

Want to know more?
Search encyclopedia, statistics and forums:

 


Press Releases |  Feeds | Contact
The Wikipedia article included on this page is licensed under the GFDL.
Images may be subject to relevant owners' copyright.
All other elements are (c) copyright NationMaster.com 2003-5. All Rights Reserved.
Usage implies agreement with terms, 1022, m