In electrical engineering, the **susceptance** (*B*) is the imaginary part of the admittance. In SI units, the susceptance is measured in siemens. In June of 1887, Oliver Heaviside used the term "*permittance*" which later became *susceptance*. Electrical engineering is an engineering discipline that deals with the study and application of electricity and electromagnetism. ...
In electrical engineering, the admittance (Y) is the inverse or reciprocal of the impedance (Z). ...
The International System of Units (abbreviated SI from the French phrase, Système International dUnités) is the most widely used system of units. ...
The siemens (symbol: S) is an SI derived unit of measurement for electric conductance, being the inverse of the ohm (Ω), named after Werner von Siemens. ...
Oliver Heaviside (May 18, 1850 – February 3, 1925) was a self-taught British engineer, mathematician and physicist. ...
In electrical engineering, the susceptance (B) is the imaginary part of the admittance. ...
## Mathematics
where
*Y* is the admittance, measured in siemens
*G* is the conductance, measured in siemens Conductance can refer to: Electrical conductance, the reciprocal of electrical resistance. ...
*B* is the susceptance, measured in siemens. The admittance (*Y*) is the inverse of the impedance (*Z*) where *Z* is the impedance, measured in ohms In electrical engineering, impedance is a measure for the manner and degree a component resists the flow of electrical current if a given voltage is applied. ...
The ohm is the SI derived unit of electrical resistance (derived from the ampere and the watt). ...
*R* is resistance, measured in ohms Electrical resistance is a measure of the degree to which an electrical component opposes the passage of current. ...
*X* is the reactance, measured in ohms. This article is about electronics. ...
Note: The susceptance is NOT the inverse of the reactance. The magnitude of admittance is given by: ## SI electricity units Amp re can refer to: Amp re (car) Ampere (unit) Andr -Marie Amp re This is a disambiguation page — a navigational aid which lists other pages that might otherwise share the same title. ...
The International System of Units (abbreviated SI from the French phrase, Système International dUnités) is the most widely used system of units. ...
In electricity, current refers to electric current, which is the flow of electric charge. ...
The coulomb, symbol C, is the SI unit of electric charge, and is defined in terms of the ampere: 1 coulomb is the amount of electric charge (quantity of electricity) carried by a current of 1 ampere flowing for 1 second. ...
Electric charge is a fundamental FATTY STASHEconserved property of some subatomic particles, which determines their electromagnetic interactions. ...
In physics the term Quantity of Electricity refers to the quantity of electric charge. ...
The volt is the SI derived unit for electric potential and voltage (derived from the ampere and watt). ...
In the physical sciences, potential difference is the difference in potential between two points in a conservative vector field. ...
The ohm is the SI derived unit of electrical resistance (derived from the ampere and the watt). ...
Electrical resistance is a measure of the degree to which an electrical component opposes the passage of current. ...
In electrical engineering, impedance is a measure for the manner and degree a component resists the flow of electrical current if a given voltage is applied. ...
This article is about electronics. ...
The ohm is the SI derived unit of electrical resistance (derived from the ampere and the watt). ...
The metre, symbol: m, is the basic unit of distance (or of length, in the parlance of the physical sciences) in the International System of Units. ...
Electrical resistivity (also known as specific electrical resistance) is a measure indicating how strongly a material opposes the flow of electric current. ...
The watt (symbol: W) is the SI derived unit for power. ...
Transmission lines in Lund, Sweden Electric power, often known as power or electricity, involves the production and delivery of electrical energy in sufficient quantities to operate domestic appliances, office equipment, industrial machinery and provide sufficient energy for both domestic and commercial lighting, heating, cooking and industrial processes. ...
The farad (symbol F) is the SI unit of capacitance (named after Michael Faraday). ...
Capacitance is a measure of the amount of electric charge stored for a given electric potential. ...
The farad (symbol F) is the SI unit of capacitance (named after Michael Faraday). ...
The metre, symbol: m, is the basic unit of distance (or of length, in the parlance of the physical sciences) in the International System of Units. ...
This article is in need of attention. ...
The farad (symbol F) is the SI unit of capacitance (named after Michael Faraday). ...
Electrical elastance is the inverse of capacitance. ...
The siemens (symbol: S) is an SI derived unit of measurement for electric conductance, being the inverse of the ohm (Ω), named after Werner von Siemens. ...
Electrical conductance is an electrical phenomenon where a material contains movable particles with electric charge, which can carry electricity. ...
In electrical engineering, the admittance (Y) is the inverse or reciprocal of the impedance (Z). ...
The siemens (symbol: S) is an SI derived unit of measurement for electric conductance, being the inverse of the ohm (Ω), named after Werner von Siemens. ...
The metre, symbol: m, is the basic unit of distance (or of length, in the parlance of the physical sciences) in the International System of Units. ...
Electrical conductivity is a measure of how well a material accommodates the transport of electric charge. ...
This article is in need of attention. ...
Magnetic flux, is a measure of quantity of magnetism, taking account of the strength and the extent of a magnetic field. ...
The tesla (symbol T) is the SI derived unit of magnetic flux density (or magnetic inductivity). ...
Magnetic field density, otherwise known as magnetic flux density, is essentially what the layman knows as a magnetic field - akin to a gravitational or electric field. ...
Amp re can refer to: Amp re (car) Ampere (unit) Andr -Marie Amp re This is a disambiguation page — a navigational aid which lists other pages that might otherwise share the same title. ...
The metre, symbol: m, is the basic unit of distance (or of length, in the parlance of the physical sciences) in the International System of Units. ...
Electromagnetic induction is the production of an electrical potential difference (or voltage) across a conductor situated in a changing magnetic field. ...
Amp re can refer to: Amp re (car) Ampere (unit) Andr -Marie Amp re This is a disambiguation page — a navigational aid which lists other pages that might otherwise share the same title. ...
Weber is a surname of German origin, derived from the noun meaning weaver. The German pronunciation is best represented in English orthography as VAYBr, while in English it is more likely to be pronounced WEBBr or WAYBr. In some cases, following migration to English-speaking countries, it...
Magnetic reluctance is the resistance of a material to a magnetic field. ...
The henry (symbol H) is the SI unit of inductance. ...
Inductance is a physical characteristic of an inductor, which is an electrical device that produces at any time a voltage proportional to the instantaneous rate of change in current flowing through it. ...
The henry (symbol H) is the SI unit of inductance. ...
The metre, symbol: m, is the basic unit of distance (or of length, in the parlance of the physical sciences) in the International System of Units. ...
In electromagnetism, permeability is the degree of magnetisation of a material that responds linearly to a magnetic field. ...
In electrical engineering, the magnetic susceptibility is the degree of magnetization of a material in response to a magnetic field. ...
## External links - Conductance, Susceptance, and Admittance (
*http://www.geocities.com/SiliconValley/2072/eleccsa.htm*) |