FACTOID # 3: South Carolina has the highest rate of violent crimes and aggravated assaults per capita among US states.
 Home   Encyclopedia   Statistics   States A-Z   Flags   Maps   FAQ   About 
People who viewed "Mirrors" also viewed:


FACTS & STATISTICS    Advanced view

Search encyclopedia, statistics and forums:



(* = Graphable)



Encyclopedia > Mirrors
This article is about the reflective surfaces.
For other uses, see Mirror (disambiguation).

A mirror is a reflective surface that is smooth enough to form an image. The best known example is the plane mirror. The commonest use is in the home for shaving, make-up etc but mirrors are also used in scientific apparatus such as telescopes and lasers, and in industrial machinery.



In a plane mirror, a parallel beam of light changes its direction as a whole, whilst still remaining parallel; the images formed by a plane mirror are virtual images, of the same size as the original object (see mirror image). There are also parabolic concave mirrors, where a parallel beam of light becomes a convergent beam, whose rays intersect in the focus of the mirror. Finally, there are convex mirrors, where a parallel beam becomes divergent, with the apparent intersection occurring behind the mirror. Note that spherical concave and convex mirrors do not have a single focal point, as often described in high school physics text books (see spherical aberration in Lens (optics) and Aberration in optical systems).

A beam of light reflects off a mirror at an angle of reflection that is equal to its angle of incidence. That is, if the beam of light is shining on a mirror's surface at a 30 angle from vertical, then it reflects from the point of incidence at a 30 angle from vertical in the opposite direction.

Contrary to popular belief, mirrors do not actually reverse left-to-right; they actually reverse front-to-back. Light rays reflecting off a mirror have their front-to-back direction reversed, while the left-to-right and top-to-bottom components of their direction remain unchanged. The confusion comes from the perception that if a person were standing behind the mirror facing us, as our reflection seems to, then they would be reversed left-to-right relative to ourselves. However, this left-to-right reversal is not performed by the mirror, but rather by this imaginary person turning around left-to-right to face us from behind the mirror.


Early mirrors were usually a sheet of polished metal, often silver or copper.

Most modern mirrors consist of a thin layer of aluminium deposited on a sheet of glass. They are back silvered, where the reflecting surface is viewed through the glass sheet; this makes the mirror durable, but lowers the image quality of the mirror due to extraneous reflections from the front surface of the glass. This type of mirror reflects about 80% of the incident light. The "back side" of the mirror is often painted black to completely seal the metal from corrosion.


Viewing one's own body

A mirror is used for inspecting parts of one's body which are difficult or impossible to see directly, such as the face, neck or the whole body. This may be to check physical appearance (including clothing, make-up, hair, etc.) or to control applying make-up, shaving, cutting hair, fixing one's tie, etc.


Telescopes and other precision instruments use front silvered mirrors, where the reflecting surface is placed on the front surface of the glass, which gives better image quality. Some of them use silver, but most are aluminum, which is more reflective at short wavelengths than silver. All of these coatings are easily damaged and require special handling. They reflect 90% to 95% of the incident light when new. The coatings are typically applied by vacuum deposition. A protective overcoat is usually applied before the mirror is removed from the vacuum, because the coating otherwise begins to corrode as soon as it is exposed to oxygen and humidity in the air. Front silvered mirrors have to be resurfaced occasionally to keep their quality.

Reflections in a spherical convex mirror.The photographer is seen at top right

The reflectivity of the mirror coating depends on the wavelength of light as well as the metal, and this is exploited in some optical work to make cold and hot mirrors. A cold mirror is made by using a transparent substrate and choosing a coating material that is more reflective to visible light and more transmissive to infrared light. A hot mirror is the opposite, the coating preferentially reflects infrared. Mirror surfaces are sometimes given thin film overcoatings both to retard degradation of the surface and to increase their reflectivity in parts of the spectrum where they will be used. For instance, aluminum mirrors are commonly coated with magnesium fluoride. The reflectivity as a function of wavelength depends on both the thickness of the coating and on how it is applied.

For scientific optical work, dielectric mirrors are often used. These are glass (or sometimes other material) substrates on which one or more layers of dielectric material are deposited, to form an optical coating. By careful choice of the type and thickness of the dielectric layers, the range of wavelengths and amount of light reflected from the mirror can be specified. The best mirrors of this type can reflect >99.999% of the light (in a narrow range of wavelengths) which is incident on the mirror. Such mirrors are often used in lasers.

Rear-view mirrors

Rear-view mirrors are applied in and on vehicles.

There exist rear view sunglasses, of which the left end of the left glass and the right end of the right glass work as mirrors.

One-way mirror

A one-way mirror, also called two-way mirror (!), reflects about half of the light and lets the other half pass. It is a sheet of glass coated with a layer of metal only a few dozen atoms thick, allowing some of the light through the surface (from both sides). It is used between a dark room and a brightly lit room. Persons on the brightly lit side see their own reflection -- it looks like a normal mirror. Persons on the dark side see through it -- it looks like a transparent window. It may be used to observe criminal suspects or customers (to watch out for theft). The same type of mirror, when used in an optical instrument, is called a half-silvered mirror. Its purpose is to split a beam of light so that half passes straight through, while the other half is reflected -- this is useful for interferometry.


A decorative reflecting sphere of thin metal-coated glass, working as a reducing wide-angle mirror, is sold as a Christmas tree decoration called a bauble.


With the sun as light source, a mirror can be used to signal, by variations in the orientation of the mirror. The signal can be used over long distances, possibly up to 60 kilometers on a clear day. This technique was used by Native American tribes and numerous militaries to transmit information between distant outposts.

See also

External links

  • California penal code (http://caselaw.lp.findlaw.com/cacodes/pen/639-653.1.html) (see art. 653n about two-way mirrors)
  • mirror.sytes.org (http://wikipedia.org.mirror.sytes.org/wiki/mirror): text is simply in reversed letter order.

  Results from FactBites:
Mirror Image, powering your online business with digital media delivery (735 words)
Mirror Image provides a proven content delivery network for digital media that ensures the best possible user experience while enabling companies to minimized their website infrastructure investment and operational costs.
Mirror Image's services enable you to reduce your infrastructure costs and still meet the demands of your Internet traffic and strategy.
"Without Mirror Image, we wouldn't be able to handle the surges in our website traffic and there would be hundreds, if not thousands, of public school students who would not have received books and other valuable supplies from generous donors around the country."
Mirror - definition of Mirror in Encyclopedia (1034 words)
Early mirrors consisted of a plate or sheet of polished metal, often silver or copper when the reflected image was for viewing (such as for personal grooming) but also of other metals when only the intensity of reflected light was important.
A cold mirror is made by using a transparent substrate and choosing a coating material that is more reflective to visible light and more transmissive to infrared light.
Mirror surfaces are sometimes given thin film overcoatings both to retard degradation of the surface and to increase their reflectivity in parts of the spectrum where they will be used.
  More results at FactBites »



Share your thoughts, questions and commentary here
Your name
Your comments

Want to know more?
Search encyclopedia, statistics and forums:


Press Releases |  Feeds | Contact
The Wikipedia article included on this page is licensed under the GFDL.
Images may be subject to relevant owners' copyright.
All other elements are (c) copyright NationMaster.com 2003-5. All Rights Reserved.
Usage implies agreement with terms, 1022, m