FACTOID # 17: Though Rhode Island is the smallest state in total area, it has the longest official name: The State of Rhode Island and Providence Plantations.
 Home   Encyclopedia   Statistics   States A-Z   Flags   Maps   FAQ   About 


FACTS & STATISTICS    Advanced view

Search encyclopedia, statistics and forums:



(* = Graphable)



Encyclopedia > Merlin engine


The Merlin is an aircraft engine built during World War II by Rolls-Royce. It was one of the two or three best aero engines in the world at that time, and powered many of the most notable warplanes.

In the early 1930s Rolls started planning for the future of its aero engine development programs, and eventually settled on having two basic designs. The 700 horsepower Peregrine was an updated, supercharged, development of their existing V-12, 22 litre Kestrel which had been used to great success in a number of 1930's designs. Two Peregrines bolted together on a common crankshaft into an X-24 layout would create the 1,700 hp (1,300 kW) 44 litre Vulture, for use in larger planes like bombers. There was also the possibility that the famous 36 litre 'R' engine from the Supermarine racing planes could be developed into a 1,500 hp (1,100 kW) class engine of its own, itself a development of the Buzzard, a scaled up Kestrel.

However this plan left a large gap between 700 and 1,500 hp (500 and 1,100 kW). To fill the gap work was started on a new 1,100 hp (820 kW) class design as the PV-12 – PV for "private venture" as they received no money for work on the project. It first flew on the front of a Hawker Hart biplane in 1935, using the new evaporative cooling system then in vogue. The cooling system proved to be somewhat suspect, and when supplies of ethylene glycol (Prestone) from the US became available, the engine was switched to this system instead.

In 1936 the Air Ministry called for new fighter aircraft with airspeeds that would eventually have to be over 300 mph (480 km/h). Two designs were eventually selected for development, the Hawker Hurricane and Supermarine Spitfire. Both were designed around the PV-12 instead of the Kestrel, and were the only modern fighters on the drawing boards. The PV-12 was instantly catapulted to the top of the supply chain and became the Merlin. First widely delivered as the 1,030 hp (770 kW) Merlin II in 1938, production was ramped up quickly.

Early Merlins were considered to be rather unreliable, but their importance was too great for this to be left alone. Rolls soon introduced a superb quality control program to address this. The program consisted of taking random engines right off the end of assembly line and running them continuously at full power until they broke. They were then disassembled to find out which part had failed, and that part was redesigned to be stronger. After two years of this the Merlin matured into one of the most reliable aero engines in the world, and could be run at full power for entire eight hour bombing missions without complaint.

As it turns out, the Peregrine saw use in only one aircraft, the Westland Whirlwind. Although the Peregrine appeared to be a satisfactory design, it was never allowed to mature as Rolls-Royce's priority was troubleshooting the Merlin. The Vulture was fitted to the Hawker Tornado and Avro Manchester, but proved unreliable due to big-end failures caused by lubrication problems. With the Merlin soon pushing into the 1,500 hp (1,100 kW) range on its own, both engines were cancelled in 1943.

Most of the upgrades to the Merlin were the result of ever-increasing octane ratings in the aviation fuel available from the US, and ever more efficient supercharger designs. At the start of the war the engine ran on the then-standard 87 octane aviation spirit and could supply just over 1,000 hp (750 kW) from its 27 litre displacement compared to 1,100 hp (820 kW) from the 34 litre Daimler-Benz DB 601.

The next major version was the XX which ran on 100 octane fuel. This allowed it to be run at higher compressions, which was achieved by increasing the "boost" from the supercharger. The result was that the otherwise similar engine delivered 1,300 hp (970 kW). This process continued, with later versions running on ever-increasing octane ratings, delivering ever-increasing power ratings. By the end of the war the "little" engine was delivering over 1,600 hp (1,200 kW) in common versions, and could deliver 2,070 hp (1,544 kW) in the Merlin 130/131 versions used on the de Havilland Hornet.

The engine was considered to be so important to the war effort that blueprints were sent to the US for safekeeping, to be handed over in case of the UK's capitulation. When this was no longer an issue in 1943, the Packard company started production in the US as the V-1650, originally for use in US-built Spitfires. The V-1650 was so much better than its US counterpart (the Allison V-1710) that it would replace that engine in the P-51 Mustang, which then went to become one of the best fighters of the war.

In comparison the Luftwaffe had no similar ability to increase octane ratings, and had to continually introduce larger and larger engines to keep up. The result was that their planes had considerably worse power-to-weight ratios than the Merlin powered planes they faced, and the continual complete change in engines designs meant they never had enough to go around. The lack of engines was one of the major problems for the Luftwaffe, from the mid 1930's right until the end of the war.

For this reason the Merlin is often considered to be one of the main factors in winning the war for the Allies. The Merlin name came from the bird (a small falcon also known as "pigeon hawk") rather than King Arthur's legendary magician.

Automobile use

In the 1960s John Dodd of Kent, England put a Merlin engine (some say it actually was a Rover Meteor tank engine, but then this is a Merlin minus superchargers) in a car called "The Beast". Originally it had a grille from a Rolls Royce, but after complaints from them he had to change it. According to himself he once drove by a Porsche driver on the autobahn and this person then called Rolls Royce asking about their "new model". The Beast was once listed in the Guinness Book of Records as the world's most powerful road car. The engine came from a Boulton Paul Balliol training aircraft and gave 1262 bhp (941 kW) at 8500 feet (2,600 m). In the car the supercharger was removed so it "only" gave about 850 bhp (630 kW). The chassis was custom made with a fibreglass body and used a gearbox from a GM 400. The car was later restored by John Dodd's son Paul Dodd and he also has a 2050 bhp (1530 kW) twin-supercharged Rolls-Royce Griffon 37 litre engine from a late-model Spitfire he is willing to put in a car if somebody would be interested in buying it.

Late night Talk show host and car buff Jay Leno is reported to have a custom built automobile featuring a Continental AV-1790-5B tank engine. This SOHC, 24 valve, air-cooled V-12 powerplant develops 810 horsepower and 1560 lb-ft of torque and is mated to an Allison 6 speed automatic transmission. This is enough horsepower to propel a 8900 pound automobile through a quarter mile in just 14.7 seconds at a speed of 93 miles per hour.

List of Aircraft | Aircraft Manufacturers | Aircraft Engines | Aircraft Engine Manufacturers

Airlines | Air Forces | Aircraft Weapons | Missiles | Timeline of aviation

  Results from FactBites:
Mosquito Variants (1186 words)
Two Mk.6 Mosquitos were modified for deck landing and converted to Sea Mosquitos by adding an arrestor hook, strengthening the rear fuselage and fitting four bladed propellers, becoming the basis for the Mk.33.
The PR.VIII was converted from B.IV by fitting special Merlin 61 intercooled engines with two speed, two stage superchargers and adding provision for two 50 gallon jettisonable wing tanks.
Merlin 25 engines, manually operated folding wings and pneumatic landing gear with smaller wheels.
[1.0] Mosquito Origins & Variants (7695 words)
The engine installation was particularly clean, with elegant slender cowlings and circular ram-air inlets in the leading edge of the wing on each side of each engine to provide cooling air for the engine radiators.
The twin Merlin engines, which drove three-bladed variable-pitch propellers, were mounted on welded steel-tube frames inside low-drag nacelles, with the radiators fitted into the wing between the fuselage and the nacelles.
The two-stage Merlin 61 proved to be the right thing at the right time, since the RAF's Spitfire V was finding themselves outclassed by the Focke-Wulf FW-190, and the new engine variant was hastily fitted to the Spitfire V airframe to create the more potent Spitfire IX.
  More results at FactBites »



Share your thoughts, questions and commentary here
Your name
Your comments

Want to know more?
Search encyclopedia, statistics and forums:


Press Releases |  Feeds | Contact
The Wikipedia article included on this page is licensed under the GFDL.
Images may be subject to relevant owners' copyright.
All other elements are (c) copyright NationMaster.com 2003-5. All Rights Reserved.
Usage implies agreement with terms, 1022, m