FACTOID # 30: If Alaska were its own country, it would be the 26th largest in total area, slightly larger than Iran.
 Home   Encyclopedia   Statistics   States A-Z   Flags   Maps   FAQ   About 


FACTS & STATISTICS    Advanced view

Search encyclopedia, statistics and forums:



(* = Graphable)



Encyclopedia > Lattice defect

Crystalline solids have a very regular atomic structure: that is, the local positions of atoms with respect to each other are repeated at the atomic scale. These arrangements are called crystal structures, and their study is called crystallography. However, most crystalline materials are not perfect: the regular pattern of atomic arrangement is interrupted by crystal defects. The various types of defects are enumerated here. Quartz crystal A crystal is a solid in which the constituent atoms, molecules, or ions are packed in a regularly ordered, repeating pattern extending in all three spatial dimensions. ... Crystallography (from the Greek words crystallon = cold drop / frozen drop, with its meaning extending to all solids with some degree of transparency, and graphein = write) is the experimental science of determining the arrangement of atoms in solids. ...


Point defects

  • Vacancies are sites which are usually occupied by an atom but which are unoccupied. If a neighboring atom moves to occupy the vacant site, the vacancy moves in the opposite direction to the site which used to be occupied by the moving atom. The stability of the surrounding crystal structure guarantees that the neighboring atoms will not simply collapse around the vacancy. In some materials, neighboring atoms actually move away from a vacancy, because they can better form bonds with atoms in the other directions.
  • Interstitials are atoms which occupy a site in the crystal structure at which there is usually not an atom. They are generally high energy configurations. Small atoms in some crystals can occupy interstices without high energy, such as hydrogen in palladium.
  • Impurities occur because material are never 100% pure. In the case of an impurity, the atom is often incorporated at a regular atomic site in the crystal structure. This is neither a vacant site nor is the atom on an interstitial site and it is called a substitutional defect. The atom is not supposed to be anywhere in the crystal, and is thus an impurity.
  • Anti-site defects occur in an ordered alloy. For example, some alloys have a regular structure in which every other atom is a different species, for illustration assume that type A atoms sit on the cube corners of a cubic lattice, and type B atoms sit in center of the cubes. If one cube has an A atom at its center, the atom is on a site usually occupied by an atom, but it is not the correct type. This is neither a vacancy nor an interstitial, nor an impurity.
  • Complexes can form between different kinds of point defects. For example, if a vacancy encounters an impurity, the two may bind together if the impurity is too large for the lattice. Interstitials can form 'split interstitial' or 'dumbbell' structures where two atoms effectively share an atomic site, resulting in neither atom actually occupying the site.

Interstitial is a generic term for referring to the space between other structures or objects. ... General Name, Symbol, Number hydrogen, H, 1 Chemical series nonmetals Group, Period, Block 1, 1, s Appearance colorless Atomic mass 1. ... General Name, Symbol, Number palladium, Pd, 46 Chemical series transition metals Group, Period, Block 10, 5, d Appearance silvery white metallic Atomic mass 106. ...

Line defects

Line defects can be described by gauge theories.

  • Dislocations are linear defects around which some of the atoms of the crystal lattice are misaligned. There are two basic types of dislocations, the EDGE dislocation and the SCREW dislocation. ("MIXED" dislocations combining aspects of both types are also common).

Edge dislocations are caused by the termination of a plane of atoms in the middle of a crystal. In such a case, the adjacent planes are not straight, but instead bend around the edge of the terminating plane so that the crystal structure is perfectly ordered on either side. The analogy with a stack of paper is apt: if a half a piece of paper is inserted in a stack of paper, the defect in the stack is only noticeable at the edge of the half sheet. For the syntaxic operation, see Dislocation (syntax) For the medical term, see Dislocation (medicine) In materials science a dislocation is a linear crystallographic defect, or irregularity, in crystal structure. ...

The screw dislocation is more difficult to visualise, but basically comprises a structure in which a helical path is traced around the linear defect (dislocation line) by the atomic planes of atoms in the crystal lattice.

The presence of dislocations results in lattice strain (distortion). The direction and magnitude of such distortion is expressed in terms of a Burgers vector (b). For an edge type, b is perpendicular to the dislocation line, whereas in the cases of the screw type it is parallel. In metallic materials, b is aligned with close-packed crytallographic directions and its magnitude is equivalent to one interatomic spacing. In materials science, a dislocation is a linear crystallographic defect, or irregularity, within a crystal structure. ...

Dislocations can move if the atoms from one of the surrounding planes break their bonds and rebond with the atoms at the terminating edge.

It is the presence of dislocations and their ability to readily move (and interact) under the influence of stresses induced by external loads that leads to the characteristic malleability of metallic materials. Malleability is a physical property of metals and metal alloys, or generally of any kind of matter. ...

Dislocations can be observed using transmission electron microscopy, field ion microscopy and atom probe techniques. Transmission electron microscopy (TEM) is an imaging technique whereby a beam of electrons is focused onto a specimen causing an enlarged version to appear on a fluorescent screen or layer of photographic film (see electron microscope), or can be detected by a CCD camera. ... Field ion microscopy (FIM) is an analytical technique used in materials science. ... The atom probe is an atomic-resolution microscope used in materials science that was invented in 1967 by Erwin Müller. ...

Disinclinations are line defects corresponding to "adding" or "subtracting" an angle around a line. Basically, this means that if you track the crystal orientation around the line defect, you get a rotation.

Planar defects

  • Grain boundaries occur where the crystallographic direction of the lattice abruptly changes. This commonly occurs when two crystals begin growing separately and then meet.
  • Anti phase boundaries occur in ordered alloys: in this case, the crystallographic direction remains the same, each side of the boundary has an opposite phase: For example if the ordering is usually ABABABAB, an anti phase boundary takes the form of ABABBABA.
  • Stacking faults occur in a number of crystal structures, but the common example is in close packed structures. face centered cubic (fcc) structures differ from hexagonal close packed (hcp) structures only in stacking order: both structures have close packed atomic planes with six fold symmetry -- the atoms form equilateral triangles. When stacking one of these layers on top of another, the atoms are not directly on top of one another -- the first two layers are identical for hcp and fcc, and labelled AB. If the third layer is placed so that its atoms are directly above those of the first layer, the stacking will be ABA -- this is the hcp structure, and it continues ABABABAB. However there is another location for the third layer, such that its atoms are not above the first layer. Instead, the fourth layer is placed so that its atoms are directly above the first layer. This produces the stacking ABCABCABC, and is actually a cubic arrangement of the atoms. A stacking fault is a one or two layer interruption in the stacking sequence, for example if the sequence ABCABABCAB were found in an fcc structure.

Bulk defects

  • Voids are small regions where there are no atoms, and can be thought of as clusters of vacancies.
  • Impurities can cluster together to form small regions of a different phase. These are often called precipitates.

See also

This article addresses the possible defects of a diamond crystal. ...


  • Hagen Kleinert, Gauge Fields in Condensed Matter, Vol. II, "STRESSES AND DEFECTS", pp. 743-1456, World Scientific (Singapore, 1989); Paperback ISBN 9971-50-210-0 (also available online here)

  Results from FactBites:
defect - Definitions from Dictionary.com (584 words)
Defect is the general word for any kind of shortcoming or imperfection, whether literal or figurative: a defect in eyesight, in a plan.
Flaw is applied to a defect in quality, caused by imperfect structure (as in a diamond) or brought about during manufacture (as in texture of cloth, in clearness of glass, etc.).
Defective was a euphemism for "mentally ill" from 1898 to c.1935.
Crystallographic defect - Wikipedia, the free encyclopedia (1067 words)
Dislocations are linear defects around which some of the atoms of the crystal lattice are misaligned.
The screw dislocation is more difficult to visualise, but basically comprises a structure in which a helical path is traced around the linear defect (dislocation line) by the atomic planes of atoms in the crystal lattice.
Disinclinations are line defects corresponding to "adding" or "subtracting" an angle around a line.
  More results at FactBites »



Share your thoughts, questions and commentary here
Your name
Your comments

Want to know more?
Search encyclopedia, statistics and forums:


Press Releases |  Feeds | Contact
The Wikipedia article included on this page is licensed under the GFDL.
Images may be subject to relevant owners' copyright.
All other elements are (c) copyright NationMaster.com 2003-5. All Rights Reserved.
Usage implies agreement with terms, 1022, m