FACTOID # 16: In the 2000 Presidential Election, Texas gave Ralph Nader the 3rd highest popular vote count of any US state.
 
 Home   Encyclopedia   Statistics   States A-Z   Flags   Maps   FAQ   About 
   
 
WHAT'S NEW
RELATED ARTICLES
People who viewed "Gear" also viewed:
 

SEARCH ALL

FACTS & STATISTICS    Advanced view

Search encyclopedia, statistics and forums:

 

 

(* = Graphable)

 

 


Encyclopedia > Gear
Spur gears found on a piece of farm equipment
Spur gears found on a piece of farm equipment
Reduction gears on Pratt & Whitney Canada PT6 gas turbine engine.
Reduction gears on Pratt & Whitney Canada PT6 gas turbine engine.

A gear is a component within a transmission device that transmits rotational force to another gear or device. A gear is different from a pulley in that a gear is a round wheel which has linkages ("teeth" or "cogs") that mesh with other gear teeth, allowing force to be fully transferred without slippage. Depending on their construction and arrangement, geared devices can transmit forces at different speeds, torques, or in a different direction, from the power source. Gears are a very useful simple machine. The most common situation is for a gear to mesh with another gear, but a gear can mesh with any device having compatible teeth, such as linear moving racks. A gear's most important feature is that gears of unequal sizes (diameters) can be combined to produce a mechanical advantage, so that the rotational speed and torque of the second gear are different from that of the first. In the context of a particular machine, the term "gear" also refers to one particular arrangement of gears among other arrangements (such as "first gear"). Such arrangements are often given as a ratio, using the number of teeth or gear diameter as units. The term "gear" is also used in non-geared devices which perform equivalent tasks: Look up gear in Wiktionary, the free dictionary. ... Download high resolution version (500x680, 39 KB)Description: Photograph of spur gears on a piece of farm equipment. ... Download high resolution version (500x680, 39 KB)Description: Photograph of spur gears on a piece of farm equipment. ... Spur gears found on a piece of farm equipment. ... A PT6A-20 on display at the Canada Aviation Museum A PT6A-67D engine on a Beechcraft 1900D. The jet nozzle on the exhaust is prominent. ... Gearbox redirects here. ... This article is about rotation as a movement of a physical body. ... For the band, see Pulley (band). ... This article does not cite any references or sources. ... For other senses of this word, see torque (disambiguation). ... This article is about the concept in physics. ... In physics and engineering, mechanical advantage (MA) is the factor by which a mechanism multiplies the force put into it. ...

"...broadly speaking, a gear refers to a ratio of engine shaft speed to driveshaft speed. Although CVTs change this ratio without using a set of planetary gears, they are still described as having low and high "gears" for the sake of convention."[1]

Contents

The continuously variable transmission (CVT) is a transmission in which the ratio of the rotational speeds of two shafts, as the input shaft and output shaft of a vehicle or other machine, can be varied continuously within a given range, providing an infinite number of possible ratios. ...

Mechanical advantage

Intermeshing gears in motion
Intermeshing gears in motion

The interlocking of the teeth in a pair of meshing gears means that their circumferences necessarily move at the same rate of linear motion (eg., metres per second, or feet per minute). Since rotational speed (eg. measured in revolutions per second, revolutions per minute, or radians per second) is proportional to a wheel's circumferential speed divided by its radius, we see that the larger the radius of a gear, the slower will be its rotational speed, when meshed with a gear of given size and speed. The same conclusion can also be reached by a different analytical process: counting teeth. Since the teeth of two meshing gears are locked in a one to one correspondence, when all of the teeth of the smaller gear have passed the point where the gears meet -- ie., when the smaller gear has made one revolution -- not all of the teeth of the larger gear will have passed that point -- the larger gear will have made less than one revolution. The smaller gear makes more revolutions in a given period of time; it turns faster. The speed ratio is simply the reciprocal ratio of the numbers of teeth on the two gears. Gears. ...


(Speed A * Number of teeth A) = (Speed B * Number of teeth B)


This ratio is known as the gear ratio. Gears on a piece of farm equipment, gear ratio 1:1. ...


The torque ratio can be determined by considering the force that a tooth of one gear exerts on a tooth of the other gear. Consider two teeth in contact at a point on the line joining the shaft axes of the two gears. In general, the force will have both a radial and a circumferential component. The radial component can be ignored: it merely causes a sideways push on the shaft and does not contribute to turning. The circumferential component causes turning. The torque is equal to the circumferential component of the force times radius. Thus we see that the larger gear experiences greater torque; the smaller gear less. The torque ratio is equal to the ratio of the radii. This is exactly the inverse of the case with the velocity ratio. Higher torque implies lower velocity and vice versa. The fact that the torque ratio is the inverse of the velocity ratio could also be inferred from the law of conservation of energy. Here we have been neglecting the effect of friction on the torque ratio. The velocity ratio is truly given by the tooth or size ratio, but friction will cause the torque ratio to be actually somewhat less than the inverse of the velocity ratio. For other senses of this word, see torque (disambiguation). ...


In the above discussion we have made mention of the gear "radius". Since a gear is not a proper circle but a roughened circle, it does not have a radius. However, in a pair of meshing gears, each may be considered to have an effective radius, called the pitch radius, the pitch radii being such that smooth wheels of those radii would produce the same velocity ratio that the gears actually produce. The pitch radius can be considered sort of an "average" radius of the gear, somewhere between the outside radius of the gear and the radius at the base of the teeth.


The issue of pitch radius brings up the fact that the point on a gear tooth where it makes contact with a tooth on the mating gear varies during the time the pair of teeth are engaged; also the direction of force may vary. As a result, the velocity ratio (and torque ratio) is not, actually, in general, constant, if one considers the situation in detail, over the course of the period of engagement of a single pair of teeth. The velocity and torque ratios given at the beginning of this section are valid only "in bulk" -- as long-term averages; the values at some particular position of the teeth may be different.


It is in fact possible to choose tooth shapes that will result in the velocity ratio also being absolutely constant -- in the short term as well as the long term. In good quality gears this is usually done, since velocity ratio fluctuations cause undue vibration, and put additional stress on the teeth, which can cause tooth breakage under heavy loads at high speed. Constant velocity ratio may also be desirable for precision in instrumentation gearing, clocks and watches. The involute tooth shape is one that results in a constant velocity ratio, and is the most commonly used of such shapes today. The involute gear profile is the most commonly used system for gearing today. ...


Comparison with other drive mechanisms

The definite velocity ratio which results from having teeth gives gears an advantage over other drives (such as traction drives and V-belts) in precision machines such as watches that depend upon an exact velocity ratio. In cases where driver and follower are in close proximity gears also have an advantage over other drives in the reduced number of parts required; the downside is that gears are more expensive to manufacture and their lubrication requirements may impose a higher operating cost. Traction usually refers to friction between a drive member and the surface it runs on, where friction is used to provide motion. ... v-belt flat belt A Belt is a looped strip of flexible material, used to mechanically link two or more rotating shafts. ...


The automobile transmission allows selection between gears to give various mechanical advantages. Car redirects here. ... Gearbox redirects here. ...


Gear types

External vs. internal gears

Unlike most gears, an internal gear (shown here) does not cause direction reversal.
Unlike most gears, an internal gear (shown here) does not cause direction reversal.

An external gear is one with the teeth formed on the outer surface of a cylinder or cone. Conversely, an internal gear is one with the teeth formed on the inner surface of a cylinder or cone. For bevel gears, an internal gear is one with the pitch angle exceeding 90 degrees.[2] Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...

Spur gears

Spur gears are the simplest and most common type of gear. Their general form is a cylinder or disk. The teeth project radially, and with these "straight-cut gears", the leading edges of the teeth are aligned parallel to the axis of rotation. These gears can only mesh correctly if they are fitted to parallel axles.[3]


Helical gears

Helical gears from a Meccano construction set.
Helical gears from a Meccano construction set.

Helical gears offer a refinement over spur gears. The leading edges of the teeth are not parallel to the axis of rotation, but are set at an angle. Since the gear is curved, this angling causes the tooth shape to be a segment of a helix. The angled teeth engage more gradually than do spur gear teeth. This causes helical gears to run more smoothly and quietly than spur gears. Helical gears also offer the possibility of using non-parallel shafts. A pair of helical gears can be meshed in two ways: with shafts oriented at either the sum or the difference of the helix angles of the gears. These configurations are referred to as parallel or crossed, respectively. The parallel configuration is the more mechanically sound. In it, the helices of a pair of meshing teeth meet at a common tangent, and the contact between the tooth surfaces will, generally, be a curve extending some distance across their face widths. In the crossed configuration, the helices do not meet tangentially, and only point contact is achieved between tooth surfaces. Because of the small area of contact, crossed helical gears can only be used with light loads. Image File history File links Download high-resolution version (908x799, 443 KB) This is a composite image made from my own photographs of gears from a Meccano Set. ... Image File history File links Download high-resolution version (908x799, 443 KB) This is a composite image made from my own photographs of gears from a Meccano Set. ... Meccano is a model construction kit comprising re-usable metal strips, plates, angle girders, wheels, axles and gears, with nuts and bolts to connect the pieces. ... A helix (pl: helices), from the Greek word έλικας/έλιξ, is a twisted shape like a spring, screw or a spiral (correctly termed helical) staircase. ... A helix (pl: helices), from the Greek word έλικας/έλιξ, is a twisted shape like a spring, screw or a spiral (correctly termed helical) staircase. ...


Quite commonly, helical gears come in pairs where the helix angle of one is the negative of the helix angle of the other; such a pair might also be referred to as having a right handed helix and a left handed helix of equal angles. If such a pair is meshed in the 'parallel' mode, the two equal but opposite angles add to zero: the angle between shafts is zero -- that is, the shafts are parallel. If the pair is meshed in the 'crossed' mode, the angle between shafts will be twice the absolute value of either helix angle.


Note that 'parallel' helical gears need not have parallel shafts -- this only occurs if their helix angles are equal but opposite. The 'parallel' in 'parallel helical gears' must refer, if anything, to the (quasi) parallelism of the teeth, not to the shaft orientation.


As mentioned at the start of this section, helical gears operate more smoothly than do spur gears. With parallel helical gears, each pair of teeth first make contact at a single point at one side of the gear wheel; a moving curve of contact then grows gradually across the tooth face. It may span the entire width of the tooth for a time. Finally, it recedes until the teeth break contact at a single point on the opposite side of the wheel. Thus force is taken up and released gradually. With spur gears, the situation is quite different. When a pair of teeth meet, they immediately make line contact across their entire width. This causes impact stress and noise. Spur gears make a characteristic whine at high speeds and can not take as much torque as helical gears because their teeth are receiving impact blows. Whereas spur gears are used for low speed applications and those situations where noise control is not a problem, the use of helical gears is indicated when the application involves high speeds, large power transmission, or where noise abatement is important. The speed is considered to be high when the pitch line velocity (that is, the circumferential velocity) exceeds 5000 ft/min.[4] A disadvantage of helical gears is a resultant thrust along the axis of the gear, which needs to be accommodated by appropriate thrust bearings, and a greater degree of sliding friction between the meshing teeth, often addressed with specific additives in the lubricant. A thrust bearing is a particular type of bearing. ...


Double helical gears

Double helical gears, also known as herringbone gears, overcome the problem of axial thrust presented by 'single' helical gears by having teeth that set in a 'V' shape. Each gear in a double helical gear can be thought of as two standard, but mirror image, helical gears stacked. This cancels out the thrust since each half of the gear thrusts in the opposite direction. They can be directly interchanged with spur gears without any need for different bearings.


Where the oppositely angled teeth meet in the middle of a herringbone gear, the alignment may be such that tooth tip meets tooth tip, or the alignment may be staggered, so that tooth tip meets tooth trough. The latter type of alignment results in what is known as a Wuest type herringbone gear.


With the older method of fabrication, herringbone gears had a central channel separating the two oppositely-angled courses of teeth. This was necessary to permit the shaving tool to run out of the groove. The development of the Sykes gear shaper now makes it possible to have continuous teeth, with no central gap.[citation needed] A gear shaper is a machine tool for cutting the teeth of an internal gear. ...


Bevel gears

Bevel gear used to lift floodgate by means of central screw.
Bevel gear used to lift floodgate by means of central screw.
Main article: Bevel gear

Bevel gears are essentially conically shaped, although the actual gear does not extend all the way to the vertex (tip) of the cone that bounds it. With two bevel gears in mesh, the vertices of their two cones lie on a single point, and the shaft axes also intersect at that point. The angle between the shafts can be anything except zero or 180 degrees. Bevel gears with equal numbers of teeth and shaft axes at 90 degrees are called miter gears. Image File history File links Bevel_gear. ... Image File history File links Bevel_gear. ... Bevel gears are gears where the axes of the two shafts intersect and the tooth-bearing faces of the gears themselves are conically shaped. ... Tokyo floodgates to protect from typhoon surges. ... Look up screw in Wiktionary, the free dictionary. ... Bevel gears are gears where the axes of the two shafts intersect and the tooth-bearing faces of the gears themselves are conically shaped. ...


The teeth of a bevel gear may be straight-cut as with spur gears, or they may be cut in a variety of other shapes. 'Spiral bevel gears' have teeth that are both curved along their (the tooth's) length; and set at an angle, analogously to the way helical gear teeth are set at an angle compared to spur gear teeth. 'Zero bevel gears' have teeth which are curved along their length, but not angled. Spiral bevel gears have the same advantages and disadvantages relative to their straight-cut cousins as helical gears do to spur gears. Straight bevel gears are generally used only at speeds below 5 m/s (1000 ft/min), or, for small gears, 1000 r.p.m.[5]


Crown gear

A crown gear
A crown gear

A crown gear or contrate gear is a particular form of bevel gear whose teeth project at right angles to the plane of the wheel; in their orientation the teeth resemble the points on a crown. A crown gear can only mesh accurately with another bevel gear, although crown gears are sometimes seen meshing with spur gears. A crown gear is also sometimes meshed with an escapement such as found in mechanical clocks. Illustration of a crown gear made by Wapcaplet with Blender and cropped in the GIMP. File links The following pages link to this file: Gear Categories: GFDL images ... Illustration of a crown gear made by Wapcaplet with Blender and cropped in the GIMP. File links The following pages link to this file: Gear Categories: GFDL images ... A simple escapement. ...

Hypoid gears

Main article: Hypoid

Hypoid gears resemble spiral bevel gears, except that the shaft axes are offset, not intersecting. The pitch surfaces appear conical but, to compensate for the offset shaft, are in fact hyperboloids of revolution.[citation needed] Hypoid gears are almost always designed to operate with shafts at 90 degrees. Depending on which side the shaft is offset to, relative to the angling of the teeth, contact between hypoid gear teeth may be even smoother and more gradual than with spiral bevel gear teeth. Also, the pinion can be designed with fewer teeth than a spiral bevel pinion, with the result that gear ratios of 60:1 and higher are "entirely feasible" using a single set of hypoid gears.[6] A hypoid is the name given to a type of helical (spiral) gear. ... A hypoid is the name given to a type of helical (spiral) gear. ...


Worm gear

A worm and gear from a Meccano construction set
A worm and gear from a Meccano construction set
Main article: Worm gear

A worm is a gear that resembles a screw. It is a species of helical gear, but its helix angle is usually somewhat large(ie., somewhat close to 90 degrees) and its body is usually fairly long in the axial direction; and it is these attributes which give it its screw like qualities. A worm is usually meshed with an ordinary looking, disk-shaped gear, which is called the "gear", the "wheel", the "worm gear", or the "worm wheel". The prime feature of a worm-and-gear set is that it allows the attainment of a high gear ratio with few parts, in a small space. Helical gears are, in practice, limited to gear ratios of 10:1 and under; worm gear sets commonly have gear ratios between 10:1 and 100:1, and occasionally 500:1.[7] In worm-and-gear sets, where the worm's helix angle is large, the sliding action between teeth can be considerable, and the resulting frictional loss causes the efficiency of the drive to be usually less than 90 percent, sometimes less than 50 percent, which is far less than other types of gears.[8] Image File history File links Download high-resolution version (633x701, 282 KB) I created this image by photographing gears from a Meccano construction set. ... Image File history File links Download high-resolution version (633x701, 282 KB) I created this image by photographing gears from a Meccano construction set. ... Meccano is a model construction kit comprising re-usable metal strips, plates, angle girders, wheels, axles and gears, with nuts and bolts to connect the pieces. ... Worm and worm gear A worm gear, or worm wheel, is a type of gear that engages with a worm to greatly reduce rotational speed, or to allow higher torque to be transmitted. ... This article is about screws and bolts. ...


The distinction between a worm and a helical gear is made when at least one tooth persists for a full 360 degree turn around the helix. If this occurs, it is a 'worm'; if not, it is a 'helical gear'. A worm may have as few as one tooth. If that tooth persists for several turns around the helix, the worm will appear, superficially, to have more than one tooth, but what one in fact sees is the same tooth reappearing at intervals along the length of the worm. The usual screw nomenclature applies: a one-toothed worm is called "single thread" or "single start"; a worm with more than one tooth is called "multiple thread" or "multiple start".


We should note that the helix angle of a worm is not usually specified. Instead, the lead angle, which is equal to 90 degrees minus the helix angle, is given.


In a worm-and-gear set, the worm can always drive the gear. However, if the gear attempts to drive the worm, it may or may not succeed. Particularly if the lead angle is small, the gear's teeth may simply lock against the worm's teeth, because the force component circumferential to the worm is not sufficient to overcome friction. Whether this will happen depends on a function of several parameters; however, an approximate rule is that if the tangent of the lead angle is greater than the coefficient of friction, the gear will not lock.[9] Worm-and-gear sets that do lock in the above manner are called "self locking". The self locking feature can be an advantage, as for instance when it is desired to set the position of a mechanism by turning the worm and then have the mechanism hold that position. An example of this is the tuning mechanism on some types of stringed instruments.

Helical and Worm Hand, ANSI/AGMA 1012-G05
Helical and Worm Hand, ANSI/AGMA 1012-G05

If the gear in a worm-and-gear set is an ordinary helical gear only point contact between teeth will be achieved.[10] If medium to high power transmission is desired, the tooth shape of the gear is modified to achieve more intimate contact with the worm thread. A noticeable feature of most such gears is that the tooth tops are concave, so that the gear partly envelopes the worm. A further development is to make the worm concave (viewed from the side, perpendicular to its axis) so that it partly envelopes the gear as well; this is called a cone-drive or Hindley worm.[11] Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...


A right hand helical gear or right hand worm is one in which the teeth twist clockwise as they recede from an observer looking along the axis. The designations, right hand and left hand, are the same as in the long established practice for screw threads, both external and internal. Two external helical gears operating on parallel axes must be of opposite hand. An internal helical gear and its pinion must be of the same hand.


A left hand helical gear or left hand worm is one in which the teeth twist counterclockwise as they recede from an observer looking along the axis.[2]


Rack and pinion

Rack and pinion animation
Rack and pinion animation
Main article: Rack and pinion

A rack is a toothed bar or rod that can be thought of as a sector gear with an infinitely large radius of curvature. Torque can be converted to linear force by meshing a rack with a pinion: the pinion turns; the rack moves in a straight line. Such a mechanism is used in automobiles to convert the rotation of the steering wheel into the left-to-right motion of the tie rod(s). Racks also feature in the theory of gear geometry, where, for instance, the tooth shape of an interchangeable set of gears may be specified for the rack (infinite radius), and the tooth shapes for gears of particular actual radii then derived from that. The rack and pinion gear type is employed in a rack railway. Rack and pinion animation. ... Rack and pinion animation A rack and pinion is a pair of gears which convert rotational motion into linear motion. ... Car redirects here. ... Steering is the term applied to the collection of components, linkages, etc. ... Rack railway track using Von Roll system rack. ...

Sun and planet gear

Main article: Sun and planet gear

The sun and planet gear was a method of converting vertical motion to rotary motion and utilised a reciprocating steam engine. ...

Non-circular gear

Main article: Non-circular gear

Non-circular gear example A non-circular gear (NCG) is a special gear design with special characteristics and purpose. ...

Epicyclic gearing

Main article: epicyclic gearing

In an ordinary gear train, the gears rotate but their axes are stationary. An epicyclic gear train is one in which one or more of the axes also moves. Examples are the sun and planet gear system invented by the company of James Watt, in which the axis of the planet gear revolves around the central sun gear; and the differential gear system used to drive the wheels of automobiles, in which the axis of the central bevel pinion is turned "end over end" by the ring gear, the drive to the wheels being taken off by bevel gears meshing with the central bevel pinion. With the differential gearing, the sum of the two wheel speeds is fixed, but how it is divided between the two wheels is undetermined, so the outer wheel can run faster and the inner wheel slower on corners. Epicyclic gearing is used here to increase output speed. ... Epicyclic gearing is used here to increase output speed. ... For other persons named James Watt, see James Watt (disambiguation). ...


Nomenclature

General nomenclature

Gear parts labelled
Gear parts labelled

Common abbreviations: Image File history File links Size of this preview: 624 × 599 pixel Image in higher resolution (1079 × 1036 pixel, file size: 276 KB, MIME type: image/png) File links The following pages on the English Wikipedia link to this file (pages on other projects are not listed): Gear ... Image File history File links Size of this preview: 624 × 599 pixel Image in higher resolution (1079 × 1036 pixel, file size: 276 KB, MIME type: image/png) File links The following pages on the English Wikipedia link to this file (pages on other projects are not listed): Gear ...

  • n.  Rotational velocity. (Measured, for example, in r.p.m.)
  • ω  Angular velocity. (Radians per unit time.) (1 r.p.m. = π/30 radians per second.)
  • N.  Number of teeth.

Gear terminology: Angular velocity describes the speed of rotation and the orientation of the instantaneous axis about which the rotation occurs. ...

  • Gear or wheel. The larger of two interacting gears.
  • Pinion. The smaller gear in a pair.
  • Path of contact. The path followed by the point of contact between two meshing gear teeth.
  • Line of action, also called 'Pressure line'. The line along which the force between two meshing gear teeth is directed. It has the same direction as the force vector. In general, the line of action changes from moment to moment during the period of engagement of a pair of teeth. For involute gears, however, the tooth-to-tooth force is always directed along the same line -- that is, the line of action is constant. this implies that for involute gears the path of contact is also a straight line, coincident with the line of action -- as is indeed the case.
    Further note on tooth force: If two rigid objects make contact, they always do so at a point (or points) where the tangents to their surfaces coincide -- that is, where there is a common tangent. The perpendicular to the common tangent at the point of contact is called the common normal. Ignoring friction, the force exerted by the objects on each other is always directed along the common normal. Thus, for meshing gear teeth, the line of action is the common normal to the tooth surfaces.
  • Axis. The axis of revolution of the gear; center line of the shaft.
  • Pitch point (p). The point where the line of action crosses a line joining the two gear axes.
  • Pitch circle. A circle, centered on and perpendicular to the axis, and passing through the pitch point. Sometimes also called the 'pitch line', although it is a circle.
  • Pitch diameter (D). Diameter of a pitch circle. Equal to twice the perpendicular distance from the axis to the pitch point. The nominal gear size is usually the pitch diameter.
  • Module (m). The module of a gear is equal to the pitch diameter divided by the number of teeth. [12].
  • Operating pitch diameters. The pitch diameters determined from the number of teeth and the center distance at which gears operate.[2] Example for pinion:  d_w = frac{2a}{u+1} = frac{2a}{frac{z_2}{z_1}+1}.
  • Pitch surface. For cylindrical gears, this is the cylinder formed by projecting a pitch circle in the axial direction. More generally, it is the surface formed by the sum of all the pitch circles as one moves along the axis. Eg., for bevel gears it is a cone.
  • Angle of action. Angle with vertex at the gear center, one leg on the point where mating teeth first make contact, the other leg on the point where they disengage.
  • Arc of action. The segment of a pitch circle subtended by the angle of action.
  • Pressure angle (ø). The complement of the angle between the direction that the teeth exert force on each other, and the line joining the centers of the two gears. For involute gears, the teeth always exert force along the line of action, which, for involute gears, is a straight line; and thus, for involute gears, the pressure angle is constant.
  • Outside diameter (Do). Diameter of the gear, measured from the tops of the teeth.
  • Root diameter. Diameter of the gear, measured from the base of the tooth space.
  • Addendum (a). The radial distance from the pitch surface to the outermost point of the tooth.  a = (Do - D) / 2.
  • Dedendum (b). The radial distance from the depth of the tooth trough to the pitch surface. b = (D - root diameter) / 2.
  • Whole depth (ht). Whole depth (tooth depth) is the total depth of a tooth space, equal to addendum plus dedendum, also equal to working depth plus clearance.[2]
  • Clearance. Clearance is the distance between the root circle of a gear and the addendum circle of its mate.[2]
  • Working depth. Working depth is the depth of engagement of two gears, that is, the sum of their operating addendums.[2]
  • Circular pitch (p). The distance from one face of a tooth to the corresponding face of an adjacent tooth on the same gear, measured along the pitch circle.
  • Diametral pitch (Pd). The ratio of the number of teeth to the pitch diameter. Eg., could be measured in teeth per inch or teeth per centimeter.
  • Base circle. Applies only to involute gears, where the tooth profile is the involute of the base circle. The radius of the base circle is somewhat smaller than that of the pitch circle.
  • Base pitch (pb). Applies only to involute gears. It is the distance from one face of a tooth to the corresponding face of an adjacent tooth on the same gear, measured along the base circle. Sometimes called the 'normal pitch'.
  • Interference. Contact between teeth other than at the intended parts of their surfaces.
  • Interchangeable set. A set of gears, any of which will mate properly with any other.

Helical gears:

  • Helix angle (ψ). The angle between a tangent to the helix and the gear axis. Is zero in the limiting case of a spur gear.
  • Normal circular pitch (pn). Circular pitch in the plane normal to the teeth.
  • Transverse circular pitch (p). Circular pitch in the plane of rotation of the gear. Sometimes just called "circular pitch". pn = p cos(ψ).
  • Several other helix parameters can be viewed either in the normal or transverse planes. The subscript " n " usually indicates the normal.

Worm gears:

  • Lead. The distance from any point on a thread to the corresponding point on the next turn of the same thread, measured parallel to the axis.
  • Linear pitch (p). The distance from any point on a thread to the corresponding point on the adjacent thread, measured parallel to the axis. For a single-thread worm, lead and linear pitch are the same.
  • Lead angle (λ). The angle between a tangent to the helix and a plane perpendicular to the axis. Note that it is the complement of the helix angle which isusually given for helical gears.
  • Pitch diameter (Dw). Same as described earlier in this list. Note that for a worm it is still measured in a plane perpendicular to the gear axis, not a tilted plane.
  • Subscript " w " denotes the worm, " g " denotes the gear.

Tooth contact nomenclature

Point of contact

Path of Action, ANSI/AGMA 1012-G05
Path of Action, ANSI/AGMA 1012-G05

A point of contact is any point at which two tooth profiles touch each other. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...

Line of contact

Line of Contact, ANSI/AGMA 1012-G05
Line of Contact, ANSI/AGMA 1012-G05

A line of contact is a line or curve along which two tooth surfaces are tangent to each other. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...

Path of action

The path of action is the locus of successive contact points between a pair of gear teeth, during the phase of engagement. For conjugate gear teeth, the path of action passes through the pitch point. It is the trace of the surface of action in the plane of rotation.

Line of action

Line of Action, ANSI/AGMA 1012-G05
Line of Action, ANSI/AGMA 1012-G05

The line of action is the path of action for involute gears. It is the straight line passing through the pitch point and tangent to both base circles. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...

Surface of action

The surface of action is the imaginary surface in which contact occurs between two engaging tooth surfaces. It is the summation of the paths of action in all sections of the engaging teeth.

Plane of action

Plane of Action, ANSI/AGMA 1012-G05
Plane of Action, ANSI/AGMA 1012-G05

The plane of action is the surface of action for involute, parallel axis gears with either spur or helical teeth. It is tangent to the base cylinders. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...

Zone of action (contact zone)

Zone of Action, ANSI/AGMA 1012-G05
Zone of Action, ANSI/AGMA 1012-G05

Zone of action (contact zone) for involute, parallel-axis gears with either spur or helical teeth, is the rectangular area in the plane of action bounded by the length of action and the effective face width. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ... Face Width, ANSI/AGMA 1012-G05 The face width of a gear is the length of teeth in an axial plane. ...

Path of contact

Lines of Contact (helical gear), ANSI/AGMA 1012-G05
Lines of Contact (helical gear), ANSI/AGMA 1012-G05

The path of contact is the curve on either tooth surface along which theoretical single point contact occurs during the engagement of gears with crowned tooth surfaces or gears that normally engage with only single point contact. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...

Length of action

Length of Action, ANSI/AGMA 1012-G05
Length of Action, ANSI/AGMA 1012-G05

Length of action is the distance on the line of action through which the point of contact moves during the action of the tooth profile. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...

Arc of action, Qt

Arc of action is the arc of the pitch circle through which a tooth profile moves from the beginning to the end of contact with a mating profile.


Arc of approach, Qa

Arc of Action, ANSI/AGMA 1012-G05
Arc of Action, ANSI/AGMA 1012-G05

Arc of approach is the arc of the pitch circle through which a tooth profile moves from its beginning of contact until the point of contact arrives at the pitch point. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...


Arc of recess, Qr

Arc of recess is the arc of the pitch circle through which a tooth profile moves from contact at the pitch point until contact ends.


Contact ratio, mc, ε

Contact ratio in general is the number of angular pitches through which a tooth surface rotates from the beginning to the end of contact.


Transverse contact ratio, mp, εα

Transverse contact ratio is the contact ratio in a transverse plane. It is the ratio of the angle of action to the angular pitch. For involute gears it is most directly obtained as the ratio of the length of action to the base pitch.


Face contact ratio, mF, εβ

Face contact ratio is the contact ratio in an axial plane, or the ratio of the face width to the axial pitch. For bevel and hypoid gears it is the ratio of face advance to circular pitch.


Total contact ratio, mt, εγ

Total contact ratio is the sum of the transverse contact ratio and the face contact ratio.


εγ = εα + εβ


mt = mp + mF


Modified contact ratio, mo

Modified contact ratio for bevel gears is the square root of the sum of the squares of the transverse and face contact ratios.  m_{rm o} = (m_{rm p}^2 + m_{rm F}^2)^{0.5}


Limit diameter

Limit Diameter, ANSI/AGMA 1012-G05
Limit Diameter, ANSI/AGMA 1012-G05

Limit diameter is the diameter on a gear at which the line of action intersects the maximum (or minimum for internal pinion) addendum circle of the mating gear. This is also referred to as the start of active profile, the start of contact, the end of contact, or the end of active profile. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...


Start of active profile (SAP)

The start of active profile is the intersection of the limit diameter and the involute profile.

Face advance

Face Advance, ANSI/AGMA 1012-G05
Face Advance, ANSI/AGMA 1012-G05

Face advance is the distance on a pitch circle through which a helical or spiral tooth moves from the position at which contact begins at one end of the tooth trace on the pitch surface to the position where contact ceases at the other end. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...

Backlash

Backlash is the error in motion that occurs when gears change direction. It exists because there is always some gap between the tailing face of the driving tooth and the leading face of the tooth behind it on the driven gear, and that gap must be closed before force can be transferred in the new direction. The term "backlash" can also be used to refer to the size of the gap, not just the phenomenon it causes; thus, one could speak of a pair of gears as having, for example, "0.1 mm of backlash." A pair of gears could be designed to have zero backlash, but this would presuppose perfection in manufacturing, uniform thermal expansion characteristics throughout the system, and no lubricant. Therefore, gear pairs are designed to have some backlash. It is usually provided by reducing the tooth thickness of each gear by half the desired gap distance. In the case of a large gear and a small pinion, however, the backlash is usually taken entirely off the gear and the pinion is given full sized teeth. Backlash can also be provided by moving the gears farther apart. For situations, such as instrumentation and control, where precision is important, backlash can be minimised through one of several techniques. For instance, the gear can be split along a plane perpendicular to the axis, one half fixed to the shaft in the usual manner, the other half placed alongside it, free to rotate about the shaft, but with springs between the two halves providing relative torque between them, so that one achieves, in effect, a single gear with expanding teeth. Another method involves tapering the teeth in the axial direction and providing for the gear to be slid in the axial direction to take up slack. Backlash is the amount of clearance between mated gear teeth in a gear pair. ...


Shifting of gears

In some machines (e.g., automobiles) it is necessary to alter the gear ratio to suit the task. There are several methods of accomplishing this. For example: Car redirects here. ...

There are several outcomes of gear shifting in motor vehicles. In the case of air pollution emissions, there are higher pollutant emissions generated in the lower gears, when the engine is working harder than when higher gears have been attained. In the case of vehicle noise emissions, there are higher sound levels emitted when the vehicle is engaged in lower gears. This fact has been utilized in analyzing vehicle generated sound since the late 1960s, and has been incorporated into the simulation of urban roadway noise and corresponding design of urban noise barriers along roadways.[13] A manual transmission (also known as a stick shift, straight drive, or standard transmission) is a type of transmission used in automotive applications. ... The automatic gear selector in a Ford Five Hundred vehicle An automatic transmission (commonly abbreviated as AT) is an automobile gearbox that can change gear ratios automatically as the vehicle moves, thus freeing the driver from having to shift gears manually (similar but larger devices are also used for railroad... Derailleur gears are a variable ratio transmission system commonly used on bicycles, consisting of a chain, multiple sprockets and a mechanism to move the chain from one sprocket to another. ... This article does not cite its references or sources. ... Roller chain and sprocket Roller chain or bush roller chain is the type of chain most commonly used for transmission of mechanical power on bicycles, motorcycles, and in industrial and agricultural machinery. ... Hub gears or internal-gear hubs are a type of gear system used on bicycles. ... Epicyclic gearing is used here to increase output speed. ... The continuously variable transmission (CVT) is a transmission in which the ratio of the rotational speeds of two shafts, as the input shaft and output shaft of a vehicle or other machine, can be varied continuously within a given range, providing an infinite number of possible ratios. ... Gearbox redirects here. ... Air pollution is the modification of the natural characteristics of the atmosphere by a chemical, particulate matter, or biological agent. ... Roadway noise is the most prevalent form of environmental noise. ... Sound pressure level (SPL) or sound level Lp is a logarithmic measure of the energy of a particular noise relative to a reference noise source. ... The sound tube in Melbourne, Australia, designed to reduce roadway noise without detracting from the areas aesthetics. ...


Tooth profile

Profile of a Spur Gear, ANSI/AGMA 1012-G05
Profile of a Spur Gear, ANSI/AGMA 1012-G05

A profile is one side of a tooth in a cross section between the outside circle and the root circle. Usually a profile is the curve of intersection of a tooth surface and a plane or surface normal to the pitch surface, such as the transverse, normal, or axial plane. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...


The fillet curve (root fillet) is the concave portion of the tooth profile where it joins the bottom of the tooth space.2


As mentioned near the beginning of the article, the attainment of a non fluctuating velocity ratio is dependent on the profile of the teeth. Friction and wear between two gears is also dependent on the tooth profile. There are a great many tooth profiles that will give a constant velocity ratio, and in many cases, given an arbitrary tooth shape, it is possible to develop a tooth profile for the mating gear that will give a constant velocity ratio. However, two constant velocity tooth profiles have been by far the most commonly used in modern times. They are the cycloid and the involute. The cycloid was more common until the late 1800s; since then the involute has largely superseded it, particularly in drive train applications. The cycloid is in some ways the more interesting and flexible shape; however the involute has two advantages: it is easier to manufacture, and it permits the center to center spacing of the gears to vary over some range without ruining the constancy of the velocity ratio. Cycloidal gears only work properly if the center spacing is exactly right. Cycloidal gears are still used in mechanical clocks. For other uses, see Friction (disambiguation). ... The cycloidal gear profile is used in mechanical clocks. ... The involute gear profile is the most commonly used system for gearing today. ...


Undercut

Undercut, ANSI/AGMA 1012-G05
Undercut, ANSI/AGMA 1012-G05

Undercut is a condition in generated gear teeth when any part of the fillet curve lies inside of a line drawn tangent to the working profile at its point of juncture with the fillet. Undercut may be deliberately introduced to facilitate finishing operations. With undercut the fillet curve intersects the working profile. Without undercut the fillet curve and the working profile have a common tangent. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...

Pitch

Pitch, ANSI/AGMA 1012-G05
Pitch, ANSI/AGMA 1012-G05

Pitch is the distance between a point on one tooth and the corresponding point on an adjacent tooth.[2] It is a dimension measured along a line or curve in the transverse, normal, or axial directions. The use of the single word “pitch” without qualification may be ambiguous, and for this reason it is preferable to use specific designations such as transverse circular pitch, normal base pitch, axial pitch. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...


Circular pitch, p

Circular pitch is the arc distance along a specified pitch circle or pitch line between corresponding profiles of adjacent teeth.


Transverse circular pitch, pt

Tooth Pitch, ANSI/AGMA 1012-G05
Tooth Pitch, ANSI/AGMA 1012-G05

Transverse circular pitch is the circular pitch in the transverse plane. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...


Normal circular pitch, pn, pe

Normal circular pitch is the circular pitch in the normal plane, and also the length of the arc along the normal pitch helix between helical teeth or threads.

Axial pitch, px

Base Pitch Relationships, ANSI/AGMA 1012-G05
Base Pitch Relationships, ANSI/AGMA 1012-G05

Axial pitch is linear pitch in an axial plane and in a pitch surface. In helical gears and worms, axial pitch has the same value at all diameters. In gearing of other types, axial pitch may be confined to the pitch surface and may be a circular measurement. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...


The term axial pitch is preferred to the term linear pitch. The axial pitch of a helical worm and the circular pitch of its wormgear are the same.


Normal base pitch, pN, pbn

Normal base pitch in an involute helical gear is the base pitch in the normal plane. It is the normal distance between parallel helical involute surfaces on the plane of action in the normal plane, or is the length of arc on the normal base helix. It is a constant distance in any helical involute gear.


Transverse base pitch, pb, pbt

Principal Pitches, ANSI/AGMA 1012-G05
Principal Pitches, ANSI/AGMA 1012-G05

Base pitch in an involute gear is the pitch on the base circle or along the line of action. Corresponding sides of involute gear teeth are parallel curves, and the base pitch is the constant and fundamental distance between them along a common normal in a transverse plane. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...


Diametral pitch (transverse), Pd

Diametral pitch (transverse) is the ratio of the number of teeth to the standard pitch diameter in inches.


 P_{rm d} = frac{N}{D} = frac{25.4}{m} = frac{pi}{p}


Normal diametral pitch, Pnd

Normal diametral pitch is the value of diametral pitch in a normal plane of a helical gear or worm.


 P_{rm nd} = frac{P_{rm d}}{cospsi}


Angular pitch, θN, τ

Angular pitch is the angle subtended by the circular pitch, usually expressed in radians.


 tau = frac{360}{z} degrees or  frac{2pi}{z} radians


Cage gear

The cage gear, also called lantern gear or lantern pinion, has been used for centuries. Its teeth are cylindrical rods, parallel to the axle and arranged in a circle around it, much as the bars on a round bird cage or lantern. The assembly is held together by disks at either end into which the tooth rods and axle are set.


Gear materials

Wooden gears of an historic windmill
Wooden gears of an historic windmill

Numerous nonferrous alloys, cast irons, powder-metallurgy and even plastics are used in the manufacture of gears. However steels are most commonly used because of their high strength to weight ratio and low cost. Plastic is commonly used where cost or weight is a concern. A properly designed plastic gear can replace steel in many cases; It often has desirable properties. They can tolerate dirt, low speed meshing, and "skipping" quite well. Manufacturers have employed plastic to make consumer items affordable. This includes copy machines, optical storage devices, VCRs, cheap dynamos, consumer audio equipment, servo motors, and printers. This article is about machines that convert wind energy into mechanical energy. ...


Tooth thickness

Circular thickness

Tooth Thickness, ANSI/AGMA 1012-G05
Tooth Thickness, ANSI/AGMA 1012-G05

Circular thickness is the length of arc between the two sides of a gear tooth, on the specified datum circle. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...

Transverse circular thickness

Thickness Relationships, ANSI/AGMA 1012-G05
Thickness Relationships, ANSI/AGMA 1012-G05

Transverse circular thickness is the circular thickness in the transverse plane. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...


Normal circular thickness

Normal circular thickness is the circular thickness in the normal plane. In a helical gear it may be considered as the length of arc along a normal helix.


Axial thickness

Axial thickness in helical gears and worms is the tooth thickness in an axial cross section at the standard pitch diameter.


Base circular thickness

Base circular thickness in involute teeth is the length of arc on the base circle between the two involute curves forming the profile of a tooth.


Normal chordial thickness

Chordial Thickness, ANSI/AGMA 1012-G05
Chordial Thickness, ANSI/AGMA 1012-G05

Chordal thickness is the length of the chord that subtends a circular thickness arc in the plane normal to the pitch helix. Any convenient measuring diameter may be selected, not necessarily the standard pitch diameter.

Chordial addendum (chordial height)

Chordal addendum (chordal height) is the height from the top of the tooth to the chord subtending the circular thickness arc. Any convenient measuring diameter may be selected, not necessarily the standard pitch diameter.


Profile shift

The profile shift is the displacement of the basic rack datum line from the reference cylinder, made non-dimensional by dividing by the normal module. It is used to specify the tooth thickness, often for zero backlash.


Rack shift

Tooth Thickness Measurement Over Pins, ANSI/AGMA 1012-G05
Tooth Thickness Measurement Over Pins, ANSI/AGMA 1012-G05

The rack shift is the displacement of the tool datum line from the reference cylinder, made non-dimensional by dividing by the normal module. It is used to specify the tooth thickness. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...


Measurement over pins

Measurement over pins is the measurement of the distance taken over a pin positioned in a tooth space and a reference surface. The reference surface may be the reference axis of the gear, a datum surface or either one or two pins positioned in the tooth space or spaces opposite the first. This measurement is used to determine tooth thickness.

Span measurement

Span Measurement, ANSI/AGMA 1012-G05
Span Measurement, ANSI/AGMA 1012-G05

Span measurement is the measurement of the distance across several teeth in a normal plane. As long as the measuring device has parallel measuring surfaces that contact on an unmodified portion of the involute, the measurement will be along a line tangent to the base cylinder. It is used to determine tooth thickness. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...

Modified addendum teeth

Teeth of engaging gears, one or both of which have non-standard addendum.


Full-depth teeth

Full-depth teeth are those in which the working depth equals 2.000 divided by the normal diametral pitch.


Stub teeth

Long and Short Addendum Teeth, ANSI/AGMA 1012-G05
Long and Short Addendum Teeth, ANSI/AGMA 1012-G05

Stub teeth are those in which the working depth is less than 2.000 divided by the normal diametral pitch. Image File history File links No higher resolution available. ... Image File history File links No higher resolution available. ...


Equal addendum teeth

Equal addendum teeth are those in which two engaging gears have equal addendums.


Long and short-addendum teeth

Long and short addendum teeth are those in which the addendums of two engaging gears are unequal.

Gear Design Based upon Module System

Countries which have adopted the metric system generally use the module system. As a result, the term module is usually understood to mean the pitch diameter in millimeters divided by the number of teeth. When the module is based upon inch measurements, it is known as The English Module to avoid confusion with the metric module. Module is an actual dimension, whereas diametral pitch is only a ratio. Thus, if the pitch diameter of a gear is 40 millimeters and the number of teeth 20, the module is 2, which means that there are 2 millimeters of pitch diameter for each tooth[12]. The International System of Units (symbol: SI) (for the French phrase Syst me International dUnit s) is the most widely used system of units. ...


See also

  • List of gear nomenclature
  • Gear hobs

References

  1. ^ Howstuffworks "Transmission Basics"
  2. ^ a b c d e f g ANSI/AGMA 1012-G05, "Gear Nomenclature, Definition of Terms with Symbols".
  3. ^ Spur gears on non-parallel shafts can mesh, but only point contact will be achieved, not line contact across the full width of the tooth; also the length of the path of contact may be too short.
  4. ^ Doughty and Vallance give the following information on helical gear speeds: "Pitch-line speeds of 4,000 to 7,000 fpm [20 to 36 m/s] are common with automobile and turbine gears, and speeds of 12,000 fpm [61 m/s] have been successfully used." -- p.281.
  5. ^ McGraw Hill Encyclopedia of Science and Technology, "Gear", p. 742.
  6. ^ McGraw Hill Encyclopedia of Science and Technology, "Gear, p. 743.
  7. ^ Doughty and Vallance, p. 287.
  8. ^ Doughty and Vallance, pp. 280, 296.
  9. ^ Doughty and Vallance, p. 296.
  10. ^ This appears wrong to me but it's in two of my references: Doughty and Vallance, p. 290; McGraw Hill Encyclopedia of Science and Technology, "Gear", p. 743.
  11. ^ McGraw Hill Encyclopedia of Science and Technology, "Gear", p. 744.
  12. ^ a b Oberg, E; Jones, F.D.; Horton, H.L.; Ryffell, H.H. (2000). Machinery's Handbook (26th Edition). Industrial Press, 2649. ISBN 978-0-8311-2666-7. 
  13. ^ [http://www.worldcatlibraries.org/wcpa/top3mset/2930880 C Michael Hogan and Gary L Latshaw,The Relationship Between Highway Planning and Urban Noise , Proceedings of the ASCE, Urban Transportation Division Specialty Conference by the American Society of Civil Engineers, Urban Transportation Division, May 21 to 23, 1973, Chicago, Illinois

General sources

  • Earle Buckingham, Analytical Mechanics of Gears; 1988, Mineola, New York, USA; Dover. First copyright 1949 by Earle Buckingham. This is an influential treatise on gears. Advanced Level.
  • Venton Levy Doughty and Alex Vallance, Design of Machine Members, 4th edition; 1964; McGraw Hill. First edition was 1936. This is an engineering text on machine parts. It has two chapters on gears.
  • McGraw-Hill Encyclopedia of Science and Technology. 2002.
  • American National Standards Institute (ANSI) / American Gear Manufacturers Association (AGMA) 1012-G05, "Gear Nomenclature, Definition of Terms with Symbols". The definitive source of gear specifications.
  • American Gear Manufacturers Association website

The McGraw-Hill Encyclopedia of Science and Technology is a traditional multivolume printed-on-paper compendium of information, specifically focused on scientific and technical subjects. ... The American National Standards Institute or ANSI (pronounced an-see) is a nonprofit organization that oversees the development of standards for products, services, processes and systems in the United States. ... The American Gear Manufacturers Association or AGMA is the responsible authority for the dissemination of the knowledge pertaining to the design and analysis of gearing. ...

External links

Wikimedia Commons has media related to:
Gears

Spur gears found on a piece of farm equipment. ... Worm drives consist of a cylinder with a spiral groove mounted on a shaft. ... Rack and pinion animation A rack and pinion is a pair of gears which convert rotational motion into linear motion. ... Epicyclic gearing is used here to increase output speed. ... The sun and planet gear was a method of converting vertical motion to rotary motion and utilised a reciprocating steam engine. ... A harmonic drive is an input/output gear reduction mechanism. ... A Cycloidal Drive or cycloidal speed reducer is a mechanism for reducing the speed of an input shaft by a certain ratio. ... Non-circular gear example A non-circular gear (NCG) is a special gear design with special characteristics and purpose. ... Download high resolution version (500x680, 39 KB)Description: Photograph of spur gears on a piece of farm equipment. ... Spur gears found on a piece of farm equipment. ... Bevel gears are gears where the axes of the two shafts intersect and the tooth-bearing faces of the gears themselves are conically shaped. ... For other uses, see Gear (disambiguation). ... A hypoid is the name given to a type of helical (spiral) gear. ... The involute gear profile is the most commonly used system for gearing today. ... The cycloidal gear profile is used in mechanical clocks. ... Gearbox redirects here. ... In an automobile and other four-wheeled vehicles, a differential is a device, usually consisting of gears, that allows each of the driving wheels to rotate at different speeds, while supplying equal torque to each of them. ... A gear coupling is a mechanical device for transmitting torque between two shafts that are not coaxial. ... A gear train is a set or system of gears arranged to transfer rotational torque from one part of a mechanical sytem to another. ... This article does not cite any references or sources. ... The continuously variable transmission (CVT) is a transmission in which the ratio of the rotational speeds of two shafts, as the input shaft and output shaft of a vehicle or other machine, can be varied continuously within a given range, providing an infinite number of possible ratios. ... Offset, ANSI/AGMA 1012-G05 Offset is the perpendicular distance between the axes of hypoid gears or offset face gears. ... Freewheel mechanism In mechanical or automotive engineering, a freewheel or overrunning clutch is a device in a transmission that disengages the driveshaft from the driven shaft when the driven shaft rotates faster than the driveshaft. ... On a bicycle, the cassette or the freewheel is the set of rear sprockets that attaches to a hub on the rear wheel. ... Derailleur gears are a variable ratio transmission system commonly used on bicycles, consisting of a chain, multiple sprockets and a mechanism to move the chain from one sprocket to another. ... A fixed gear bicycle A fixed-gear bicycle or fixed wheel bicycle, is any bicycle without a freewheel and usually only one gear ratio. ... Hub gears or internal-gear hubs are a type of gear system used on bicycles. ... A shaft-driven bicycle. ... This article does not cite its references or sources. ... Photo showing two ball screws. ... A leadscrew is a screw specialized for the purpose of translating rotational to linear motion. ... Jackscrew ( animation) A jackscrew mechanism uses a long threaded rod used to position a matching nut at any position along its length. ... v-belt flat belt Belts are used to mechanically link two or more rotating items. ... Roller chain and sprocket Mack AC delivery truck at the Petersen Automotive Museum with chain drive visible Chain drive was a popular power transmission system from the earliest days of the automobile. ... There are very few or no other articles that link to this one. ...


  Results from FactBites:
 
Gaining Early Awareness and Readiness for Undergraduate Programs (GEAR UP) (196 words)
GEAR UP provides six-year grants to states and partnerships to provide services at high-poverty middle and high schools.
GEAR UP grantees serve an entire cohort of students beginning no later than the seventh grade and follow the cohort through high school.
GEAR UP funds are also used to provide college scholarships to low-income students.
Gear - Wikipedia, the free encyclopedia (1130 words)
Gears of differing size are often used in pairs for a mechanical advantage, allowing the torque of the driving gear to produce a larger torque in the driven gear at lower speed, or a smaller torque at higher speed.
The larger gear is known as a wheel and the smaller as a pinion.
This is a gear that resembles a screw, with parallel helical teeth, and mates with a normal spur gear.
  More results at FactBites »

 
 

COMMENTARY     


Share your thoughts, questions and commentary here
Your name
Your comments

Want to know more?
Search encyclopedia, statistics and forums:

 


Press Releases |  Feeds | Contact
The Wikipedia article included on this page is licensed under the GFDL.
Images may be subject to relevant owners' copyright.
All other elements are (c) copyright NationMaster.com 2003-5. All Rights Reserved.
Usage implies agreement with terms, 1022, m