IUPAC nomenclature is a systematic way of naming organic chemical compounds. Ideally, every organic compound should have a name from which an unambiguous structural formula can be drawn. There is also a IUPAC system for naming inorganic compounds, see the systematic name page for details.
In IUPAC nomenclature, a number of prefixes, suffixes and infixes are used to describe the type and position of functional groups in the compound.
Straight-chain alkanes take the suffix "-ane" and are prefixed depending on the number of carbon atoms in the chain, as given by the following table:
|Number of carbons ||1 ||2 ||3 ||4 ||5 ||6 ||7 ||8 ||9 ||10 ||11 ||12 |
|Prefix ||Meth ||Eth ||Prop ||But ||Pent ||Hex ||Hept ||Oct ||Non ||Dec ||Undec ||Dodec |
For example, the simplest alkane is CH4 methane, and the nine-carbon alkane CH3(CH2)7CH3 is named nonane.
Cyclic alkanes are simply prefixed with "cyclo-", for example C4H8 is cyclobutane and C6H12 is cyclohexane.
Branched alkanes are named as a straight_chain alkane with attached alkyl groups. They are prefixed with a number indicating the carbon the group is attached to, counting from the end of the alkane chain. Infixed is the name of the substituant, as for alkanes in the table above, plus "-yl". For example, (CH3)2CHCH3, commonly known as isobutane, is treated as a propane chain with a methyl group bonded to the middle (2) carbon, and given the systematic name 2-methylpropane. Numbers may be dropped when there is no ambiguity, so 2-methylpropane is just methylpropane. (1-methylpropane would be identical to butane).
If there is ambiguity in the position of the substituant, depending on which end of the alkane chain is counted as "1", then numbering is chosen so that the smallest number is used. For example, (CH3)2CHCH2CH3 (isopentane) is named 2-methylbutane, not 3-methylbutane. Since this resolves the ambiguity, the number is again dropped in this case.
If there are multiple side-branches of the same size alkyl group, their positions are separated by commas and the group prefixed with di-, tri-, tetra-, etc., depending on the number of branches (e.g. C(CH3)4 2,2-dimethylpropane). If there are different groups, they are added in alphabetical order, separated by commas or hypens: 3-ethyl-4-methylhexane. The longest possible main alkane chain is used; therefore 3-ethyl-4-methylhexane instead of 2,3-diethylpentane, even though these describe equivalent structures. The di-, tri- etc. prefixes are ignored for the purpose of alphabetical ordering of side chains. (eg 3-ethyl-2,4-dimethylpentane, not 2,4-dimethyl-3-ethylpentane)
Subsidiary branches off a side_chain are prefixed according to a secondary numbering system specific to that side branch, numbering from the point of attachment to the main chain, and then the whole side_branch is parenthesised and treated as a single substituent. For example, 4_(1_methylpropyl)octane is a octane chain with a side chain bonded to the 4th carbon, the side chain consisting of a propyl group with a methyl group attached to the carbon closest to the main chain.
Alkenes are named for their parent alkane chain with the suffix "-ene" and an infixed number indicating the position of the double-bonded carbon in the chain: CH2=CHCH2CH3 is but-1-ene. Ethene (ethylene) and propene do not require infixed numbers, since there is no ambiguity in the structures. As before, the lowest number is used.
Multiple double bonds take the form -diene, -triene, etc., with the size prefix of the chain taking an extra "a": CH2=CHCH=CH2 is buta-1,3-diene. Simple cis and trans isomers are indicated with a prefixed cis- or trans-: cis-but-2-ene, trans-but-2-ene. More complex geometric isomerisations are described using the Cahn Ingold Prelog priority rules.
Alkynes are named using the same system, with the suffix "-yne" indicating a triple bond: ethyne (acetylene), propyne (methylacetylene).
Alcohols (R-OH) drop the terminal "e" from the name of the parent alkane, and take the suffix "-ol" with an infix numerical bonding position: CH3CH2CH2OH is propan-1-ol. (Methanol and ethanol are unambiguous and do not require position numbers). The suffixes -diol, -triol, -tetraol, etc., are used for multiple -OH groups: Ethylene glycol CH2OHCH2OH is ethane_1,2_diol.
If higher precedence functional groups are present (see order of precedence, below) , the prefix "hydroxy" is used with the bonding position: CH3CHOHCOOH is 2-hydroxypropanoic acid.
Halogen functional groups are prefixed with the bonding position and take the form fluoro-, chloro-, bromo-, iodo-, etc., depending on the halogen. Multiple groups are dichloro-, trichloro-, etc, and disimilar groups are orded alphabetically as before. For example, CHCl3 (chloroform) is trichloromethane. The anesthetic Halothane (CF3CHBrCl) is 2-bromo-2-chloro-1,1,1-trifluoroethane.
Ketones (R-CO-R) take the suffix "-one" (pronounced own, not won) with an infix position number: CH3COCH3 (acetone) is propan-2-one. If a higher precedence suffix is in use, the prefix "oxo-" is used: CH3CH2CH2COCH3CHO is 3-oxohexanal.
Aldehydes (R-CHO) take the suffix "-al". Since they are always at the end of a alkane chain, they do not need a position number: HCHO (formaldehyde) is methanal, CH3CHO (acetaldehyde) is ethanal. If other functional groups are present, the chain is numbered such that the aldehyde carbon is in the "1" position.
If a prefix form is required, "oxo-" is used (as for ketones), with the position number indicating the end of a chain: CHOCH3COOH is 3-oxopropanoic acid. If the carbon in the carbonyl group cannot be included in the attached chain (for instance in the case of cyclic aldehydes), the prefix "formyl-" or the suffix "-carbaldehyde" is used: C6H11CHO is cyclohexanecarbaldehyde.
Carboxylic acids are named with the suffix "-anoic acid". As for aldehydes, they take the "1" position on the parent chain, but do not have their position position number indicated. For example, HCOOH (formic acid) is named methanoic acid, CH3COOH (acetic acid) named ethanoic acid.
If there are multiple carboxyl groups on the same parent chain, the suffix "-carboxylic acid" can be used (as -dicarboxylic acid, -tricarboxylic acid, etc.). In these cases, the carbon in the carboxyl group does not count as being part of the main alkane chain. The same is true for the prefix form, "carboxyl-". Citric acid is one example; it is named 2-hydroxy-1,2,3-propanetricarboxylic acid, rather than 2-carboxy, 2-hydroxypentanedioic acid.
Ethers (R-O-R) consist of an oxygen atom between the two attached carbon chains. The shorter of the two chains becomes the first part of the name with the -ane suffix changed to -oxy, and the longer alkane chain become the suffix of the name of the ether. Thus CH3OCH3 is methoxymethane, and CH3OCH2CH3 is methoxyethane (not ethoxymethane). If the oxygen is not attached to the end of the main alkane chain, then the whole shorter alkyl-plus-ether group is treated as a side-chain and prefixed with its bonding position on the main chain. Thus CH3OCH(CH3)2 is 2-methoxypropane.
Esters (R-CO-O-R) are named with the suffix "-oate" added the alkene bonded to the carbonyl side of the ester. They are prefixed with the name of the alkyl group bonded on the other side of the ester. Thus HCOOCH3 (formate) is methyl methanoate, CH3COOCH3 (acetate) is methyl ethanoate, and HCOOCH3 (ethyl formate) is ethyl methaonate.
If the alkyl group is not attached at the end of the chain, the bond position to the ester group is infixed before "-yl": CH3CH2C(CH3)OOCH2CH2CH3 is but-2-yl propanoate.
Amines (R-NH2) are named for the attached alkane chain with the suffix "-amine" (e.g. CH3NH2 methanamine). If necessary, the bonding position is infixed: CH3CH2CH2NH2 propan-1-amine, CH3CHNH2CH3 propan-2-amine. The prefix form is "amino-".
For secondary amines (of the form R-NH-R), the longest carbon chain attached to the nitrogen atom becomes the primary name of the amine; the other chain is prefixed as an alkyl group with location prefix given as an italic N: CH3NHCH2CH3 is N-methylethanamine. Tertiary amines (R-NR-R) are treated similarly: CH3CH22N(CH3)CH2CH2CH3 is N-methyl-N-ethylpropanamine.
Amides (R-CO-NH2) take the suffix "-amide". There is no prefix form, and no location number is required since they always terminate a carbon chain, e.g. CH3CONH2 (acetamide) is named ethanamide.
Secondary and tertiary amides are treated similarly to the case of amines: alkane chains bonded to the nitrogen atom are treated as substituents with the location prefix N: HCON(CH3)2 is N,N-dimethylmethanamide.
Cycloalkanes and aromatic compounds can be treated as the main parent chain of the compound, in which case the position of substituents are numbered around the ring structure. For example, the three isomers of xylene CH3C6H4CH3, commonly the ortho-, meta-, and para- forms, are 1,2-dimethylbenzene, 1,3-dimethylbenzene, and 1,4-dimethylbenzene. The cyclic structures can also be treated as functional groups themselves, in which case they take the prefix "cycloalkyl-" (e.g. "cyclohexyl-") or for benzene, "phenyl-".
The IUPAC nomenclature scheme becomes rapidly more elaborate for more complex cyclic structures, with notation for compounds containing conjoined rings, and many common names such as phenol, furan, indole, etc. being accepted as base names for compounds derived from them.
Order of precedence of groups
When compounds contain more than one functional group, the order of precedence determines which groups are named with prefix or suffix forms. The highest precedence group takes the suffix, with all others taking the prefix form. However, double and triple bonds only take suffix form (-en and -yn) and are used with other suffixes.
Prefixed substituents are ordered alphabetically (including any modifiers such as di-, tri-, etc.), e.g. chlorofluoromethane, not fluorochloromethane. If there are multiple functional groups of the same type, either prefixed or suffixed, the position numbers are ordered numerically (thus ethane-1,2-diol, not ethane-2,1-diol.) The N position indicator for amines and amides comes before "1", e.g. CH3CH(CH3)CH2NH(CH3) is N,2-dimethylpropanamine.
|Precedence ||Group ||Formula ||Suffix ||Prefix |
|1 ||Carboxylic acid ||R-COOH ||-oic acid ||carboxy |
|2 ||Ester ||R-CO-O-R ||-oate ||none |
|3 ||Amide ||R-CONH2 ||-amide ||none |
|4 ||Cyanide ||R-CN ||-nitrile ||cyano |
|5 ||Aldehyde ||R-CHO ||-al ||oxo |
|6 ||Ketone ||R-CO-R ||-one ||oxo |
|7 ||Alcohol ||R-OH ||-ol ||hydroxy |
|8 ||Sulfhydryl ||R-SH ||-thiol ||mercapto |
|9 ||Amine ||R-NH2 ||-amine ||amino |
Common nomenclature is an older system of naming organic compounds.
Common names for ketones can be derived by naming the two alkyl or aryl groups bonded to the carbonyl group as separate words followed by the word ketone.
The common name for an aldehyde is derived from the common name of the corresponding carboxylic acid by dropping the word acid and changing the suffix from -ic or -oic to -aldehyde.
The IUPAC nomenclature also provides rules for naming ions.
Hydron is a generic term for hydrogen cation; protons, deuterons and tritons are all hydrons.
Parent hydride cations
Simple cations formed by adding a hydron to a hydride of a halogen, chalogen or nitrogen-family element are named by adding the suffix "-onium" to the element's root: H4N+ is ammonium, H3O+ is oxonium, and H2F+ is fluoronium. Ammonium was adopted instead of nitronium, which commonly refers to NO2+.
If the cationic center of the hydride is not a halogen, chalcogen or nitrogen-family element then the suffix "-ium" is added to the name of the neutral hydride after dropping any final 'e'. H5C+ is methanium, HO-O+H2 is dioxidanium (HO-OH is dioxidane), and H2N-N+H3 is diazanium (H2N-NH2 is diazane).
Cations and substitution
The above cations except for methanium are not, strictly speaking, organic, since they do not contain carbon. However, many organic cations are obtained by substituting another element or some functional group for a hydrogen.
The name of each substitution is prepended to the hydride cation name. If many substitutions by the same functional group occur, then the number is indicated by prepending "di-", "tri-" as with halogenation. (CH3)3O+ is trimethyloxonium. CH3F3N+ is trifluoromethylammonium.
- IUPAC Nomenclature of Organic Chemistry (http://www.acdlabs.com/iupac/nomenclature/)